50 MHz Calibrator Amplitude Adjustment

This adjustment applies to the following models:

All X-Series models

This adjustment adjusts the internal 50 MHz calibrator signal to be equal amplitude to an external 50 MHz, -25.00 dBm signal. The reference signal is provided by a calibrated, traceable oscillator.

Click here for troubleshooting.

Required Test Equipment

Test Equipment	Recommended Model Number
50 MHz Calibrator	Z5602B Opt H51 for Type-N models Opt H35 for 3.5 mm models Opt H24 for 2.4 mm models

Connection Setups

In the following setups, cables are designated as solid lines and direct connections are designated as dashed lines.

50 MHz Calibrator Amplitude Adjustment

This adjustment applies to the following models:

Required Test Equipment

Connection Setups

50 MHz Calibrator Amplitude Adjustment Setup