The RF ABUS Calibration must be performed prior to this adjustment.
|
|
The RF ABUS Calibration must be performed prior to this adjustment. |
The goal of this calibration is to turn on the MUAT oscillator and peak its output power. This calibration is done in two parts. First a coarse adjustment is performed to determine the bounds of the RF Tank DAC value where the MUAT oscillator is activated. Once the DAC bounds are determined, a fine adjustment is performed to peak the power delivered by the MUAT oscillator.
No additional equipment required.
|
|
All test equipment requires a 30 minute warmup period to ensure accurate performance. |
Preset all test equipment and the signal generator.