Time Tab (cdma2000/1xEV-DV)
The Time tab of the cdma2000/1xEV DV Demod Properties dialog box, specifies the signal analysis configuration parameters. Use these parameters to specify a segment of the time record (captured input signal) for further viewing and data analysis.
The Time tab dialog box configures these parameters (click on the parameter name for further information):
-
Use Gated Active Channel Detection (Forward link only)
-
Use Gated Modulation Detection † (Forward link only)
† must have
selected.
Measurement Offset/Interval Exceptions
and Measurement Interval are used by all measurement trace data results except the following composite signal trace data: CDE Composite, CDE Layer Composite Error Summary, Composite IQ Meas Time/Spectrum, Composite IQ Ref Time/Spectrum, Composite Error Vector Time/Spectrum, Composite Mag Error and Composite Phase Error.
See Also
About Measurement Interval and Offset
Format tab (cdma2000/1xEV-DV Demod Properties)
Channel/Layer tab (cdma2000/1xEV-DV Demod Properties)
Predefined Channels tab (cdma2000/1xEV-DV Demod Properties)