BER Analysis (DOCSIS 4.0 Upstream)

This group of parameters relate to measurements that include BER Analysis.

Parameter	Description
BER Analysis	When enabled, bit/packet error rate information is calculated and shown in the BER Summary trace. Default: Disabled
Randomize Seed (Hex)	Configures the 23-bit seed value of the codeword randomizer, entered and displayed as a HEX value. Default: 2AAAAA
Pause Measurement After Bit Count	When enabled, the measurement pauses after the specified number of bits. Default: Disabled, 10000000 Bits This parameter is only available when BER Analysis is enabled.

Parameter

Description

When enabled, bit/packet error rate information is calculated and shown in the BER Summary trace.

Default: Disabled

Configures the 23-bit seed value of the codeword randomizer, entered and displayed as a HEX value.

Default: 2AAAAA

When enabled, the measurement pauses after the specified number of bits.

Default: Disabled, 10000000 Bits

This parameter is only available when BER Analysis is enabled.

Enable measurement averaging to accumulate bit counts.