Calculate Offset using S0 (DOCSIS 4.0 Upstream)
This parameter group helps to calculate the offset from the VSA measurement center frequency to the DOCSIS carrier center frequency. You can apply the resulting offset value to the Center Offset parameter.
- Sets the starting subcarrier frequency (S0) of the DOCSIS carrier.
- displays the carrier center frequency based on the S0 Frequency.
MeasSetup > Frequency > Center parameter.
- displays the VSA center frequency, which is set using the- Displays the calculated offset between center frequencies (Carrier Center - VSA Center).
- Click to apply the calculated Offset to the Center Offset.
See Also