Frame Trigger (DVB-S2/S2X)
SNR Signal-to-Noise Ratio situations and reduces measurement time.
- Enables or disables whether the data is captured with frame trigger. Turning Frame Trigger on improves sync in low- Disabled - Data capture length = Frame length + result length + small settling length, and the SOF search range is one frame length.
- Enabled - Capture length is shorter (capture length = result length + small settling length), and the SOF search range is within the specified Frame Trigger Margin.
Default: Disabled (Off)
- When Frame Trigger On is enabled, this parameter specifies the uncertainty range of the frame trigger relative to the real Frame boundary.
Default: 1 µs
See Also