Measurement Control Tab (DVB-S2/S2X)
The
tab of the configures the DVB-S2/S2X measurement characteristics.The measurement control settings are applied to either a single carrier or to all carriers, depending on the Component Carrier Selection. Use the Component Carrier drop-down or the Component Carrier Diagram at the top of the tab to switch between component carriers.
The Measurement Control tab configures these parameters:
- Reference Bits Plane
- Frequency Estimation Mode
- Phase Tracking Mode
- Phase Tracking Inperpolation Mode
- Phase Tracking Filter BW
- Compensate Symbol Clock Error
- Compensate IQ Offset
- Compensate IQ Gain Imbalance
- Use Multi-carrier Filter
- Equalization Mode
- Channel Estimation Source
- Normalized Channel Delay Spread
- EQ Tracking
- Tracking Convergence
See Also
DVB-S2/S2X Demod Properties Dialog Box