Available Features (TEDS)

The following is a list of features applicable to TEDS demodulation:

• Standard, channel BW dependent presets for:

  • Normal Uplink

  • Normal Downlink

  • Random Access

  • Control Uplink

• Modulation Analysis mode allows quick configuring to analyze each supported slot format and modulation type.

• Four channel bandwidths: 25kHz, 50kHz, 100kHz and 150kHz.

• Range, triggering, and center frequency selection is available.

• ACP Adjacent Channel Power: The power from a modulated communications channel that leaks into an adjacent channel. This leakage is usually specified as a ratio to the power in the main channel, but is sometimes an absolute power. PvT measurements.

See Also

TEDS Trace Data

Setting up a TEDS Measurement