About Trace Data (1xEVDO)
This application provides trace data results in the Time Domain, Frequency Domain and Code Domain. You can view code domain power trace data for the composite signal or for a specific CDP layer (symbol rate). Time domain trace data may be viewed for the composite signal or for a specific code channel. Pre demodulated and demodulated Time and Spectrum trace data is also provided.
Composite Trace Data
Composite (or Comp) trace data are measurement results derived from the total signal. This includes the combined data from all code Layers (Walsh Code Lengths (Symbol Rates)) and code channels (Walsh Code Numbers).
Channel Trace Data
Channel (or Chan) trace data are measurement results derived from a single code channel (Walsh Code Number) within the measured code layer (Walsh Code Length (Symbol Rate)).
Trace Data Menu
To accommodate all the available measurement results and display formats; trace data results are grouped into trace data sub-menu categories. These sub-menu categories are grouped together by common measurement types as described below:
|
Time and Frequency trace data results derived from the pre-demodulated time record data. |
|
|
Code Domain Power and Code Domain Error trace data results for either the composite signal or for a specified code layer. |
|
|
Time domain trace data results for a single code channel. Channel trace data results are derived from data for a single code channel (Walsh Code Number) within a specified code layer (Walsh Code Length/Symbol Rate). |
|
|
Time domain and frequency domain trace data results for the Composite signal. Composite trace data results are derived from data for the total signal, that is, the combined data from all Walsh Code Lengths (Symbol Rates) and Walsh Code Numbers. |
|
|
Error Summary data for the Overall data results. |
|
|
Math: |
Trace data results derived from a math function |
|
Register: |
Trace data results derived from Data Register data |
|
No Data: |
Active trace as empty. |
See Also
