Available Features (1xEV-DO)

Features applicable to 1xEV-DO demodulation:

Standard presets for
- 1xEV-DO Reverse link
- 1xEV-DO Forward link
1.2288 MHz Megahertz: A unit of frequency equal to one million hertz or cycles per second. variable (user definable) chip rate
Single code domain layer or composite code-domain power and code-domain error shows (the composite display shows all code layers simultaneously). You can normalize code-domain power to display the code-domain power relative to the total signal power in the code domain.
Single channel time-domain displays, such as IQ measured, IQ reference, IQ magnitude/phase error, and error Vector traces (reverse link direction only).
Composite time-domain displays, such as IQ measured time, IQ reference time, IQ magnitude or phase error, and error vector time traces.
Mirrored (flipped) frequency spectrums used to remove the effects of high-side mixing or complex conjugation mismatches in simulated data.
Measurement offset and interval (similar to time gating) used to select specific data slots for analysis
Averaging is available only for code domain data and is applied to numeric error data in the Error Summary table, as follows:
- rms (video) ¾ computes an average of each rms error update in the table.
- rms exponential ¾ like rms (video) except that averaging continues past the average count with an exponential weighting.
- peak hold/continuous peak hold ¾ keeps track of the peak rms error of each update in the table.
- Time and time exponential averaging are not available.
These average types are available for the pre-demodulated spectrum result.
- rms (video)
- rms exponential
- peak hold/continuous peak hold