Measure Menu with Coaxial Probe Measurements (Opt.004)

Click Measure to show the following choices:

Trigger Measurement

Triggers a measurement ONLY if a Calibration has already been performed.

Multiple Measurements

Perform multiple measurements over a specified time.

Import (Opt 004 only)

Loads an s1p, s2p, or *.ts (touchstone 2.0) file that contains measurement data. When a 2-port file is imported, the software uses ONLY the S11 data in the file, regardless of the currently-selected port.

Arm External Trigger

When selected, the Remote Switch is used to trigger a measurement. The Remote switch is connected to the external trigger connector on the back of the network analyzer.

Show prompt

When checked, a prompt will be displayed before the measurement is made. Otherwise the measurement will be triggered when 'Trigger Measurement' is selected or the 'Measure' Toolbar icon is clicked.

Measure Prompt