Click Measure to show the following choices:
Triggers a measurement ONLY if a Calibration has already been performed.
Executing the temperature compensation feature reduces errors due to temperature change. The temperature compensation feature uses reference data to compensate for errors that may be related to the measuring cable exposed to temperature change. Prior to compensation, the reference data is prepared by obtaining variation of measurement values of the open/short standards (heat-resistant) relative to normal temperature. The data will be obtained for all temperatures to be measured.
The following is the temperature compensation flow:
Acquire temperature compensation data for the temperature you want to measure and save it in a file.
Execute measurement at a desired temperature.
Execute the temperature compensation with the measurement result using the program for compensation.
CPN file - Acquired temperature compensation data.
Temperature - Desired temperature to execute measurement.
Correction ON - Check to execute temperature compensation.
Select to recalculate the measurement after changing settings.