(Write-only) This command applies the digital eye pattern for eye generation. Before sending this command, use the following commands to set the digital pattern:
:EYE:INPut:BPATtern:TYPE <char>
:EYE:INPut:BPATtern:LENGth <num>
:EYE:INPut:DRATe <num>
:EYE:INPut:RTIMe <num>
:EYE:INPut:OLEVel <num>
:EYE:INPut:ZLEVel <num>
Parameters
None
Examples
:EYE:INPut:APPLy
Return Type
Not Applicable
Default
Not Applicable