Property (Read-Write)
(1)SCPI.IEEE4882.OPC = Dummy
(2)Value = SCPI.IEEE4882.OPC
Case (1):
This command sets/gets 1 the OPC bit (bit 0) of the Standard Event Status Register when all of pending operations complete. For information on the structure of the status register, see Status Reporting System.
Case (2):
|
Parameter |
Value |
|
Description |
1 returned when all pending operations are complete |
|
Data type |
Long integer type (Long) |
SCPI.IEEE4882.OPC = 1
Dmy = SCPI.IEEE4882.OPC
SCPI.SENSe(Ch).CORRection.COLLect.ACQuire.ISOLation
SCPI.SENSe(Ch).CORRection.COLLect.ACQuire.LOAD
SCPI.SENSe(Ch).CORRection.COLLect.ACQuire.OPEN
SCPI.SENSe(Ch).CORRection.COLLect.ACQuire.SHORt
SCPI.SENSe(Ch).CORRection.COLLect.ACQuire.THRU
No equivalent key is available on the front panel.
10 OUTPUT 717;"*OPC"