Power Commands - Gain Compression and Gain Compression Converters Measurement Classes

Only the Main, Compression Levels, and Leveling & Offsets Power commands corresponding to the Gain Compressions and Gain Compression Converters measurement classes are documented here. The Attenuators commands are identical to the Attenuator commands for the Standard measurement class and can be accessed by clicking here or by clicking on the softtab on the graphic below.

Click here to view links to Power commands for all Measurement Classes.

Main

Compress
Levels

Leveling
& Offsets

Attenuators

Main Tab Commands
Softkey	Sub-item	SCPI
Linear Input Pwr		SENSe:GCSetup:POWer:LINear:INPut:LEVel
RF Power	ON/OFF	OUTPut[:STATe]
Start Power		SOURce:POWer:PORT:STARt
Stop Power		SOURce:POWer:PORT:STOP
Power and Attenuators...
GCA Setup... (Gain Compression Measurement Class only)
GCX Setup... (Gain Compression Converters Measurement Class only)
Compress Levels Tab Commands
Softkey	Sub-item	SCPI
Comp Method	Linear Gain	SENSe:GCSetup:POWer:LINear:INPut:LEVel
	Max Gain	SENSe:GCSetup:COMPression:LEVel
	Backoff	SENSe:GCSetup:COMPression:BACKoff:LEVel
	XY	SENSe:GCSetup:COMPression:DELTa:X SENSe:GCSetup:COMPression:DELTa:Y
	Saturation	SENSe:GCSetup:COMPression:SATuration:LEVel
Linear Input Pwr		SENSe:GCSetup:POWer:LINear:INPut:LEVel
Reverse Pwr		SENSe:GCSetup:POWer:REVerse:LEVel
Compression Level		SENSe:GCSetup:COMPression:LEVel
Back Off Level		SENSe:GCSetup:COMPression:BACKoff:LEVel
Delta X		SENSe:GCSetup:COMPression:DELTa:X
Delta Y		SENSe:GCSetup:COMPression:DELTa:Y
Saturation		SENSe:GCSetup:COMPression:SATuration:LEVel
Leveling & Offsets Tab Commands
Softkey	Sub-item	SCPI
Select	Port 1	None
	Port 2	None
	Port 3	None
	Port 4	None
	Port 1 Src2	None
	Source3	None
Offset		SOURce:POWer:ALC[:MODE]:RECeiver:OFFSet
Limit	ON/OFF	SYSTem:POWer:LIMit:STATe
Limit	Power Limit	SYSTem:POWer:LIMit
Offsets and Limits...
ALC Hardware	Internal	SOURce:POWer:ALC[:MODE]
ALC Hardware	Open Loop	SOURce:POWer:ALC[:MODE]
Receiver Leveling...