LTE FDD
Describes the markers settings for Real-Time Uplink capability.
This parameter sets the source of Real-time Marker 1.
|
SCPI Command |
[:SOURce]:RADio:LTEFdd:WAVeform:RTIMe:M1Source FSTart|SSTart|NDI|FBIN|AUX|HIGH|TAINdicator|TADIndicator|LOW [:SOURce]:RADio:LTEFdd:WAVeform:RTIMe:M1Source? |
||||||||||||||||||||
|
SCPI Example |
RAD:LTEF:WAV:RTIM:M1S SST RAD:LTEF:WAV:RTIM:M1S? |
||||||||||||||||||||
|
Runtime Apply |
Yes |
||||||||||||||||||||
|
State Saved |
Yes |
||||||||||||||||||||
|
Preset |
FSTart |
||||||||||||||||||||
|
Range |
Frame Pulse | Subframe Pulse | New Data Indicator | Feedback In Status | Feedback In | High | TA Advance Indicator | TA Delay Indicator | Low
|
||||||||||||||||||||
|
Initial S/W Revision |
A.14.00 |
This parameter sets the source of Real-time Marker 2.
|
SCPI Command |
[:SOURce]:RADio:LTEFdd:WAVeform:RTIMe:M2Source FSTart|SSTart|NDI|FBIN|AUX|HIGH|TAINdicator|TADIndicator||LOW [:SOURce]:RADio:LTEFdd:WAVeform:RTIMe:M2Source? |
|
SCPI Example |
RAD:LTEF:WAV:RTIM:M2S SST RAD:LTEF:WAV:RTIM:M2S? |
|
Runtime Apply |
Yes |
|
State Saved |
Yes |
|
Preset |
LOW |
|
Range |
Frame Pulse | Subframe Pulse | New Data Indicator | Feedback In Status | Feedback In | High | TA Advance Indicator | TA Delay Indicator | Low |
|
Initial S/W Revision |
A.14.00 |
This parameter sets the source of Real-time Marker 3.
|
SCPI Command |
[:SOURce]:RADio:LTEFdd:WAVeform:RTIMe:M3Source FSTart|SSTart|NDI|FBIN|AUX|HIGH|TAINdicator|TADIndicator|LOW [:SOURce]:RADio:LTEFdd:WAVeform:RTIMe:M3Source? |
|
SCPI Example |
RAD:LTEF:WAV:RTIM:M3S SST RAD:LTEF:WAV:RTIM:M3S? |
|
Runtime Apply |
Yes |
|
State Saved |
Yes |
|
Preset |
LOW |
|
Range |
Frame Pulse | Subframe Pulse | New Data Indicator | Feedback In Status | Feedback In | High | TA Advance Indicator | TA Delay Indicator | Low |
|
Initial S/W Revision |
A.14.00 |
This parameter sets the source of Real-time Marker 4.
|
SCPI Command |
[:SOURce]:RADio:LTEFdd:WAVeform:RTIMe:M4Source FSTart|SSTart|NDI|FBIN|AUX|HIGH|TAINdicator|TADIndicator|LOW [:SOURce]:RADio:LTEFdd:WAVeform:RTIMe:M4Source? |
|
SCPI Example |
RAD:LTEF:WAV:RTIM:M4S SST RAD:LTEF:WAV:RTIM:M4S? |
|
Runtime Apply |
Yes |
|
State Saved |
Yes |
|
Preset |
LOW |
|
Range |
Frame Pulse | Subframe Pulse | New Data Indicator | Feedback In Status | Feedback In | High | TA Advance Indicator | TA Delay Indicator | Low |
|
Initial S/W Revision |
A.14.00 |