WLAN
These carrier settings are applicable when you select:
802.11bn as the PHY Specification
and UHR ELR PPDU as the Generation Mode
Quadrature Angle Adjustment for Waveform 1
I/Q Gain Balance for Waveform 1
Quadrature Angle Adjustment for Waveform 2
I/Q Gain Balance for Waveform 2
Quadrature Angle Adjustment for Waveform 3
I/Q Gain Balance for Waveform 3
Quadrature Angle Adjustment for Waveform 4
I/Q Gain Balance for Waveform 4
Quadrature Angle Adjustment for Waveform 5
I/Q Gain Balance for Waveform 5
Quadrature Angle Adjustment for Waveform 6
I/Q Gain Balance for Waveform 6
Quadrature Angle Adjustment for Waveform 7
I/Q Gain Balance for Waveform 7
User Setup > User Configuration
User Setup > Modulation and Coding
Select the Symbol interval (with guard interval) for the UHR-LTF field. ELR PPDU only supports 2x UHR-LTF + 1.6 us GI.
This is a read-only setting.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:LTF:SINTerval:MODE? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
D2 |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
Specify the number of UHR-LTFs. ELR PPDU only supports two UHR-LTF symbols.
This is a read-only setting.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:NHELtf? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
2 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Set the number of transmit chains. When the number of instruments is more than 1, it automatically equals to the number of instruments and can't be changed. Otherwise, it is editable.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:NTX <integer>
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:NTX? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
1 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Set the contents of the spatial mapping matrix.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:SPATial:MAPPing:MATRix
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:SPATial:MAPPing:MATRix? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
1; |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
Indicates whether the frame is Uplink or Downlink. The field is set to DL for TDLS and set to UL for UHR TB PPDU.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:LINK DL|UL
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:LINK? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
DL |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
Get or Set the Base station identifier.The BSS Color field is an identifier of the BSS.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:BSS:COLor <integer>
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:BSS:COLor? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
5 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Get or set the remaining time duration in the current TXOP.
Set to 8449 us to indicate no duration information.
Set to a value other than 8449 us to indicate duration information for NAV setting and protection of the TXOP. For the value starting from 0 to 504 us, the granularity is 8 us and for the value starting from 512 to 8448 us, the granularity is 128 us.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:TXOP:DURation <real>
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:TXOP:DURation? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
8e-06 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Indicates the presence of the extra OFDM symbol for LDPC.
This is a read-only setting.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:LDPC:SYMBol? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
1 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Set the baseband quadrature angle adjustment for Waveform 1 before channel fading and mirror spectrum.
The number of parameter groups depends on Number of Transmit Chains (Ntx). Each group is identified with an incremented waveform number, such as Waveform 1, Waveform 2, and so on.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:QUAD:ANG1 <real>
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:QUAD:ANG1? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Set the baseband IQ gain balance for Waveform 1 before channel fading and mirror spectrum.
The number of parameter groups depends on Number of Transmit Chains (Ntx). Each group is identified with an incremented waveform number, such as Waveform 1, Waveform 2, and so on.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:IQ:GB1 <real>
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:IQ:GB1? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Set the baseband quadrature angle adjustment for Waveform 2 before channel fading and mirror spectrum.
The number of parameter groups depends on Number of Transmit Chains (Ntx). Each group is identified with an incremented waveform number, such as Waveform 1, Waveform 2, and so on.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:QUAD:ANG2 <real>
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:QUAD:ANG2? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Set the baseband IQ gain balance for Waveform 2 before channel fading and mirror spectrum.
The number of parameter groups depends on Number of Transmit Chains (Ntx). Each group is identified with an incremented waveform number, such as Waveform 1, Waveform 2, and so on.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:IQ:GB2 <real>
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:IQ:GB2? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Set the baseband quadrature angle adjustment for Waveform 3 before channel fading and mirror spectrum.
The number of parameter groups depends on Number of Transmit Chains (Ntx). Each group is identified with an incremented waveform number, such as Waveform 1, Waveform 2, and so on.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:QUAD:ANG3 <real>
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:QUAD:ANG3? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Set the baseband IQ gain balance for Waveform 3 before channel fading and mirror spectrum.
The number of parameter groups depends on Number of Transmit Chains (Ntx). Each group is identified with an incremented waveform number, such as Waveform 1, Waveform 2, and so on.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:IQ:GB3 <real>
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:IQ:GB3? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Set the baseband quadrature angle adjustment for Waveform 4 before channel fading and mirror spectrum.
The number of parameter groups depends on Number of Transmit Chains (Ntx). Each group is identified with an incremented waveform number, such as Waveform 1, Waveform 2, and so on.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:QUAD:ANG4 <real>
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:QUAD:ANG4? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Set the baseband IQ gain balance for Waveform 4 before channel fading and mirror spectrum.
The number of parameter groups depends on Number of Transmit Chains (Ntx). Each group is identified with an incremented waveform number, such as Waveform 1, Waveform 2, and so on.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:IQ:GB4 <real>
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:IQ:GB4? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Set the baseband quadrature angle adjustment for Waveform 5 before channel fading and mirror spectrum.
The number of parameter groups depends on Number of Transmit Chains (Ntx). Each group is identified with an incremented waveform number, such as Waveform 1, Waveform 2, and so on.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:QUAD:ANG5 <real>
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:QUAD:ANG5? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Set the baseband IQ gain balance for Waveform 5 before channel fading and mirror spectrum.
The number of parameter groups depends on Number of Transmit Chains (Ntx). Each group is identified with an incremented waveform number, such as Waveform 1, Waveform 2, and so on.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:IQ:GB5 <real>
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:IQ:GB5? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Set the baseband quadrature angle adjustment for Waveform 6 before channel fading and mirror spectrum.
The number of parameter groups depends on Number of Transmit Chains (Ntx). Each group is identified with an incremented waveform number, such as Waveform 1, Waveform 2, and so on.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:QUAD:ANG6 <real>
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:QUAD:ANG6? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Set the baseband IQ gain balance for Waveform 6 before channel fading and mirror spectrum.
The number of parameter groups depends on Number of Transmit Chains (Ntx). Each group is identified with an incremented waveform number, such as Waveform 1, Waveform 2, and so on.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:IQ:GB6 <real>
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:IQ:GB6? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Set the baseband quadrature angle adjustment for Waveform 7 before channel fading and mirror spectrum.
The number of parameter groups depends on Number of Transmit Chains (Ntx). Each group is identified with an incremented waveform number, such as Waveform 1, Waveform 2, and so on.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:QUAD:ANG7 <real>
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:QUAD:ANG7? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Set the baseband IQ gain balance for Waveform 7 before channel fading and mirror spectrum.
The number of parameter groups depends on Number of Transmit Chains (Ntx). Each group is identified with an incremented waveform number, such as Waveform 1, Waveform 2, and so on.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:IQ:GB7 <real>
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:IQ:GB7? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Set the baseband quadrature angle adjustment for Waveform 8 before channel fading and mirror spectrum.
The number of parameter groups depends on Number of Transmit Chains (Ntx). Each group is identified with an incremented waveform number, such as Waveform 1, Waveform 2, and so on.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:QUAD:ANG8 <real>
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:QUAD:ANG8? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Set the baseband IQ gain balance for Waveform 8 before channel fading and mirror spectrum.
The number of parameter groups depends on Number of Transmit Chains (Ntx). Each group is identified with an incremented waveform number, such as Waveform 1, Waveform 2, and so on.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:IQ:GB8 <real>
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:IQ:GB8? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
The index for each user.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:INDex? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Enable or disable the Scrambler. It scrambles the data to reduce the probability of long sequences of zeros and ones.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:SCRambler[:STATe] ON|OFF|1|0
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:SCRambler[:STATe]? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
ON |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
Select the Channel Coding mode. It encodes the data to enable error correction. It could be BCC and LDPC.
Support for BCC coding is limited to less than or equal to four spatial streams, UHR-MCSs 0 to 9, and UHR-MCS 15 (per user in the case of MU-MIMO). BCC support is mandatory for RU or MRU sizes less than or equal to a 242-tone RU.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:CCODing:MODE? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
LDPC |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
Enable or disable the channel encoding function. When it is Off, BCC encoder or LDPC encoder will be bypassed.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:CCODing[:STATe] ON|OFF|1|0
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:CCODing[:STATe]? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
ON |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
Enable or disable the interleaver. Interleaver interleaves the bits of each spatial stream(changes order of bits) to prevent long sequences of adjacent noisy bits from entering the BCC decoder. Interleaving is applied only when the BCC encoding is used.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:BCC:INTerleaver ON|OFF|1|0
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:BCC:INTerleaver? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
ON |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
Enable or disable the LDPC Tone Mapper. LDPC Tone Mapper is equivalent to block-interleaving the tones in each symbol.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:LDPC:MAPPer ON|OFF|1|0
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:LDPC:MAPPer? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
ON |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
Set the number of Spatial Streams used by the current user. Its maximum value is 8 for Single User, while it is 4 for Multi User MIMO. ELR PPDU only supports one spatial stream.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:NSS <integer>
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:NSS? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
1 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Set the initial state of the scrambler in decimal format, which is then turned into 7 bits to feed into the scrambler.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:SCRambler:INIT <integer>
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:SCRambler:INIT? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
99 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Set the STA ID of the current user. The STA ID refers to the AID (which represents the 16-bit ID of a STA).
The 11 LSBs of the AID field are used to address the STAs in this field. STAID value 2046 is used to indicate that the RU carries no data.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:STAid <integer>
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:STAid? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
483 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Select the MCS Index for the current user.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MCS:INDex <integer> [:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MCS:INDex? |
|
SCPI Example |
|
|
Couplings |
UHR-MCS 14 is only applied for UHR MU PPDU Compress Mode, bandwidth is greater than or equal to 80 MHz, no preamble puncture exists, and Nss = 1. UHR-MCS 15 is only applied for Nss,u= 1, and not supported over MRU 2x996+484 and MRU 3x996+484. |
|
Preset |
8 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Indicates the modulation format determined by the MCS index.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MODulation? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
BPSK |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
Indicates the data rate determined by the MCS index.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:DRATe? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
|
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
Indicates the coding rate determined by the MCS index.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:CRATe? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
R12 |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
Enable or disable the MPDU aggregation mode.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:AGGRegated:AMPDu ON|OFF|1|0
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:AGGRegated:AMPDu? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
ON |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
Enable or disable the MAC Layer Padding mode.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MAC:PADDing[:STATe] ON|OFF|1|0
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MAC:PADDing[:STATe]? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
ON |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
Determines the minimum time between the start of adjacent MPDUs within an A-MPDU that the STA can receive.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MMPDu:SSPacing NORestriction|QUARter|HALF|ONE|TWO|FOUR|EIGHt|SIXTeen
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MMPDu:SSPacing? |
|
SCPI Example |
|
|
Couplings |
Invisible when Aggregated MPDU is set to OFF. |
|
Preset |
NORestriction |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
Indicates the minimum octets between the start of adjacent MPDUs. It should be equal or greater than (Minimum MPDU Start Spacing X Data Rate / 8 ).
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MMPDu:SSPacing:OCTets? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
Indicates the number of octets in the AMPDU pre-EOF padding carried in the PSDU of the current user. It is the LENGTH defined in the standard and is equal to the sum of A-MPDU Subframe Length of all MPDUs.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:AMPDu:LENGth? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
294 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
PSDU Length is calculated with Nsym. Nsym depends on the original payload length of multi-users.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PSDU:LENGth? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
1058 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Add a new MPDU.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU:ADD |
|
SCPI Example |
|
|
Couplings |
This setting is visible only when Aggregated MPDU is set to On. |
|
Preset |
|
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
Delete the selected MPDU. Input parameter is the index of the selected MPDU.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU:DELete <integer> |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
|
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
Copy the selected MPDU. Input parameter is the index of the selected MPDU.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU:COPY <integer> |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
|
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
Displays the index for each MPDU. This cell cannot be edited.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:INDex? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Displays the number of octets in the current MPDU, which is comprised of MSDU, MAC Header, and MAC FCS.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:LENgth? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
290 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Indicates the number of octets in the current A-MPDU subframe, which is comprised of MPDU and Padded MPDU Delimiters. It is only available when the Aggregated MPDU is On.
If the current MPDU is not the last one, its length cannot be shorter than Minimum MPDU Start Spacing, otherwise, MDPU delimiters will be padded after the current MPDU.
If the current MPDU is the last one, its A-MPDU Subframe Length is equal to its MPDU Length plus the length of one MPDU Delimiter (4 octets).
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:AMPDu:SFRame:LENGth? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Select the payload data source. The user data of the frame can contain the following data:
All 0s
PN9
PN15
User file
The user file must be in binary form. The least significant bit (LSB) of the first byte in the user data file will be the first bit of the user payload; the LSB of the second byte in the user file will be the ninth bit of the user payload, and so on. If User file is selected as the Data Type, the value displayed in the Data Length field will be equal to the length of the user's data file, up to the maximum data length.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:DATA:TYPE ALL|PN9|PN15|FILE [:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:DATA:TYPE? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
PN9 |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
Specify a seed in decimal format to generate a PN9 data sequence. The LSB of the seed comes out first. For example, if you enter a seed value of 10 (1010 in binary), the first 9 bits of the PN9 sequence are 0 1 0 1 0 0 0 0 0, with an increasing index from left to right. For more information, see PN Sequence Generation.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:DATA:PN9:SEED <integer> [:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:DATA:PN9:SEED? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
511 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Specify a seed in decimal format to generate a PN15 data sequence. The LSB of the seed comes out first. For example, if you enter a seed value of 10 (1010 in binary), the first 15 bits of the PN15 sequence are 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0, with an increasing index from left to right. For more information, see PN Sequence Generation.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:DATA:PN15:SEED <integer> [:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:DATA:PN15:SEED? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
32767 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Set the number of data bytes in a frame. The value is limited by MPDU Length.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:DATA:LENGth <integer> [:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:DATA:LENGth? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
256 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Click the > button in this cell to select a user file as the data source.
The user file must be in binary form. The least significant bit (LSB) of the first byte in the user data file will be the first bit of the user payload; the LSB of the second byte in the user file will be the ninth bit of the user payload, and so on. If User file is selected as the Data Type, the value displayed in the Data Length field will be equal to the length of the user's data file, up to the maximum data length.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:DATA:FILE
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:DATA:FILE? |
|
SCPI Example |
|
|
Couplings |
This setting is available only if you select User File in the Data Type drop-down listbox. |
|
Preset |
|
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
Displays the number of data bytes in the user file when it is selected as the payload data source.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:DATA:FILE:LENGth? |
|
SCPI Example |
|
|
Couplings |
This setting is available only if you select User File in the Data Type drop-down listbox. |
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
-9223372036854776000 |
|
Max |
9223372036854776000 |
|
Initial S/W Revision |
A.18.00 |
Enable/disable the appending of a MAC FCS check sequence to the data payload.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:FCS ON|OFF|1|0
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:FCS? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
ON |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
Click the > button in this cell to open the MAC Header Dialog, which enables or disables pre-pending the MAC header to the data payload. You can select a format by clicking the down-arrow in the top right corner of the Mac Header Dialog. You can set the desired data in each of the individual fields for each format. You can also disable these fields if the data is no longer desired by clearing the Mac Header (hex) checkbox.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer[:STATe] ON|OFF|1|0 [:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer[:STATe]? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
ON |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:TYPE GENeral|RTS|CTS|ACK [:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:TYPE? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
GENeral |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:LENGth? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
30 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:FRAMe[:STATe]? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
ON |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:FRAMe:SIZE? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
2 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:FRAMe:CONTent <integer> [:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:FRAMe:CONTent? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:DURation[:STATe]? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
ON |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:DURation:SIZE? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
2 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:DURation:CONTent <integer> [:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:DURation:CONTent? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:ADDRess:A1[:STATe] ON|OFF|1|0 [:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:ADDRess:A1[:STATe]? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
ON |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:ADDRess:A1:SIZE? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
6 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:ADDRess:A1:CONTent <integer>
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:ADDRess:A1:CONTent? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
-9223372036854776000 |
|
Max |
9223372036854776000 |
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:ADDRess:A2[:STATe] ON|OFF|1|0
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:ADDRess:A2[:STATe]? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
ON |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:ADDRess:A2:SIZE? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
6 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:ADDRess:A2:CONTent <integer>
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:ADDRess:A2:CONTent? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
-9223372036854776000 |
|
Max |
9223372036854776000 |
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:ADDRess:A3[:STATe] ON|OFF|1|0
|
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
ON |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:ADDRess:A3:SIZE? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
6 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:ADDRess:A3:CONTent <integer>
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:ADDRess:A3:CONTent? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
-9223372036854776000 |
|
Max |
9223372036854776000 |
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:SEQ[:STATe] ON|OFF|1|0
|
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
ON |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:SEQ:SIZE? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
2 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:SEQ:CONTent <integer> [:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:SEQ:CONTent? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:ADDRess:A4[:STATe] ON|OFF|1|0
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:ADDRess:A4[:STATe]? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
ON |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:ADDRess:A4:SIZE? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
6 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:ADDRess:A4:CONTent <integer>
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:ADDRess:A4:CONTent? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
-9223372036854776000 |
|
Max |
9223372036854776000 |
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:QOS[:STATe] ON|OFF|1|0
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:QOS[:STATe]? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
OFF |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:QOS:SIZE? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
2 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:QOS:CONTent <integer>
|
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:HT[:STATe] ON|OFF|1|0
|
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
OFF |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:HT:SIZE? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
4 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:HT:CONTent <integer> [:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:MPDU<channel>:MAC:HEADer:HT:CONTent? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
this tab is available only when Aggregated MPDU is set to Off.
Displays the index for each MPDU. This cell cannot be edited.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:INDex? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Displays the number of octets in the current MPDU, which is comprised of MSDU, MAC Header, and MAC FCS.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:LENgth? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
290 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Select the payload data source. The user data of the frame can contain the following data:
All 0s
PN9
PN15
User file
The user file must be in binary form. The least significant bit (LSB) of the first byte in the user data file will be the first bit of the user payload; the LSB of the second byte in the user file will be the ninth bit of the user payload, and so on. If User file is selected as the Data Type, the value displayed in the Data Length field will be equal to the length of the user's data file, up to the maximum data length.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:DATA:TYPE ALL|PN9|PN15|FILE [:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:DATA:TYPE? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
PN9 |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
Specify a seed in decimal format to generate a PN9 data sequence. The LSB of the seed comes out first. For example, if you enter a seed value of 10 (1010 in binary), the first 9 bits of the PN9 sequence are 0 1 0 1 0 0 0 0 0, with an increasing index from left to right. For more information, see PN Sequence Generation.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:DATA:PN9:SEED <integer> [:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:DATA:PN9:SEED? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
511 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Specify a seed in decimal format to generate a PN15 data sequence. The LSB of the seed comes out first. For example, if you enter a seed value of 10 (1010 in binary), the first 15 bits of the PN15 sequence are 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0, with an increasing index from left to right. For more information, see PN Sequence Generation.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:DATA:PN15:SEED <integer> [:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:DATA:PN15:SEED? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
32767 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Click the > button in this cell to select a user file as the data source.
The user file must be in binary form. The least significant bit (LSB) of the first byte in the user data file will be the first bit of the user payload; the LSB of the second byte in the user file will be the ninth bit of the user payload, and so on. If User file is selected as the Data Type, the value displayed in the Data Length field will be equal to the length of the user's data file, up to the maximum data length.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:DATA:FILE
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:DATA:FILE? |
|
SCPI Example |
|
|
Couplings |
This setting is available only if you select User File in the Data Type drop-down listbox. |
|
Preset |
|
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
Displays the number of data bytes in the user file when it is selected as the payload data source.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:DATA:FILE:LENGth? |
|
SCPI Example |
|
|
Couplings |
This setting is available only if you select User File in the Data Type drop-down listbox. |
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
-9223372036854776000 |
|
Max |
9223372036854776000 |
|
Initial S/W Revision |
A.18.00 |
Set the number of data bytes in a frame. The value is limited by the MPDU Length.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:DATA:LENGth <integer> [:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:DATA:LENGth? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
256 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
Enable/disable the appending of a MAC FCS check sequence to the data payload.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:FCS ON|OFF|1|0
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:FCS? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
ON |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
Click the > button in this cell to open the MAC Header Dialog, which enables or disables pre-pending the MAC header to the data payload. You can select a format by clicking the down-arrow in the top right corner of the Mac Header Dialog. You can set the desired data in each of the individual fields for each format. You can also disable these fields if the data is no longer desired by clearing the Mac Header (hex) checkbox.
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer[:STATe] ON|OFF|1|0 [:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer[:STATe]? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
ON |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:TYPE GENeral|RTS|CTS|ACK [:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:TYPE? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
GENeral |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:LENGth? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
30 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:FRAMe[:STATe]? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
ON |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:FRAMe:SIZE? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
2 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:FRAMe:CONTent <integer> [:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:FRAMe:CONTent? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:DURation[:STATe]? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
ON |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:DURation:SIZE? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
2 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:DURation:CONTent <integer> [:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:DURation:CONTent? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:ADDRess:A1[:STATe] ON|OFF|1|0
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:ADDRess:A1[:STATe]? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
ON |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:ADDRess:A1:SIZE? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
6 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:ADDRess:A1:CONTent <integer>
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:ADDRess:A1:CONTent? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
-9223372036854776000 |
|
Max |
9223372036854776000 |
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:ADDRess:A2[:STATe] ON|OFF|1|0 [:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:ADDRess:A2[:STATe]? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
ON |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:ADDRess:A2:SIZE? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
6 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:ADDRess:A2:CONTent <integer>
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:ADDRess:A2:CONTent? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
-9223372036854776000 |
|
Max |
9223372036854776000 |
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:ADDRess:A3[:STATe] ON|OFF|1|0
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:ADDRess:A3[:STATe]? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
ON |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:ADDRess:A3:SIZE? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
6 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:ADDRess:A3:CONTent <integer>
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:ADDRess:A3:CONTent? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
-9223372036854776000 |
|
Max |
9223372036854776000 |
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:SEQ[:STATe] ON|OFF|1|0
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:SEQ[:STATe]? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
ON |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:SEQ:SIZE? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
2 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:SEQ:CONTent <integer>
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:SEQ:CONTent? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:ADDRess:A4[:STATe] ON|OFF|1|0
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:ADDRess:A4[:STATe]? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
ON |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:ADDRess:A4:SIZE? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
6 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:ADDRess:A4:CONTent <integer>
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:ADDRess:A4:CONTent? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
-9223372036854776000 |
|
Max |
9223372036854776000 |
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:QOS[:STATe] ON|OFF|1|0
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:QOS[:STATe]? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
OFF |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:QOS:SIZE? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
2 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:QOS:CONTent <integer>
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:QOS:CONTent? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:HT[:STATe] ON|OFF|1|0
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:HT[:STATe]? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
OFF |
|
State Saved |
Yes |
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:HT:SIZE? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
4 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |
|
SCPI Command |
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:HT:CONTent <integer>
[:SOURce]:RADio:WLAN:WAVeform:BN:ELR:USERsetup<channel>:PAYLoad:MAC:HEADer:HT:CONTent? |
|
SCPI Example |
|
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
|
|
Max |
|
|
Initial S/W Revision |
A.18.00 |