1. Configuration
Instrument Model Number
Displays the model number of the currently connected instrument. The parameters that are available in the signal generator node are determined by the Instrument Model Number.
Retrieve Instrument Model Number
Retrieves and displays the model number of the currently connected instrument.
Parameter Optimization
Selections: Auto, Off
Default: Auto
Enables or disables parameter optimization.
-
Auto − overrides the current settings to optimize settings
-
Off − parameter optimization is not applied.
When Parameter Optimization is set to , Marker 3 and Marker 4 source selection in the Waveform Setup node and the marker routing selected in the Dual Arb Marker Utilities are overridden.
To manually set Marker 3 and Marker 4 source, the marker routing, or both, set the Parameter Optimization to .
Perform DC I/Q Calibration
Selections: On, Off
Default: On
Enables or disables automatic DC I/Q calibration.
-
On − the signal generator performs a DC I/Q calibration after downloading a waveform.
-
Off − the signal generator does not perform DC I/Q calibrations.