Open topic with navigation

PDU Payload Setting (LL_PHY_REQ, LL_PHY_RSP, LL_PHY_UPDATE_REQ)

• LL_PHY_REQ

• LL_PHY_RSP

• LL_PHY_UPDATE_REQ

Opcode

Display the control type of the Bluetooth low energy wireless technology packet.

• 0x16 − LL_PHY_REQ

• 0x17 − LL_PHY_RSP

• 0x18 − LL_PHY_UPDATE_REQ

Rx PHYs

Range: 0 to 5

Default: 1

Set to indicate the receiver PHYs that the sender prefers to use.

Tx PHYs

Range: 0 to 5

Default: 1

Set to indicate the transmitter PHYs that the sender prefers to use.

Master to Slave PHY

Range: 0 to 5

Default: 1

Set to indicate the PHY that shall be used for packets sent from the master to the slave.

Slave to Master PHY

Range: 0 to 5

Default: 1

Set to indicate the PHY that shall be used for packets sent from the slave to the master.

Instant

Range: 1 to 32767

Default: 1

Set the Count of LL connection event before the new LL connection event of the Bluetooth low energy wireless technology packet.