[:SENSe]:AMPLitude:CORRections:SANTenna:DEFault

(Write-only) Clears the Source-side Antenna Correction table. This is the same as selecting the New softkey and then confirming “Yes” from the Edit/Save/Recall Source Antennas menu.

For Receiver antenna, use [:SENSe]:AMPLitude:CORRections:ANTenna:DEFault

Relevant Modes

SA, ERTA

Parameters

None

Examples

AMPL:CORR:SANT:DEF

Query Syntax

Not Applicable

Default

Not Applicable