[:SENSe]:NR5G:MEASure:EMF  <bool>

(Read-Write) Set and query the EMF measurement mode state (activates and deactivates the EMF measurement mode). Note that you must connect and setup a supported EMF probe/antenna (refer to the B Series User's Guide N9938-90003 on Keysight.com) before activating the EMF measurement mode.

Relevant Modes

5G NR

Parameters

<booleon>

Set the EMF measurement mode. Choose from:

OFF or 0 - The EMF mode is not active.

ON or 1 - The EMF mode is active.

Couplings

None

Examples

NR5G:MEAS:EMF ON */Sets the EMF measurement mode to ON

Query Syntax

NR5G:MEAS:EMF?

Return Type

Booleon

Default

ON