[:SENSe]:NR5G:PCOMp  <bool>

(Read-Write) Set and query the Phase Compensation state (whether or not phase compensation is applied to the measurement).

See also, See Physical channels and modulation (3GPP TS 38.211 version 15.7.0 Release 15) Section 5.4.

Note: The phase compensation state is always applied at the current measurement frequency (Measurement Frequency = Center Frequency + Offset Frequency).

Relevant Modes

5G NR

Parameters

<booleon>

Set the phase compensation state. Choose from:

OFF or 0 - The phase compensation state is applied to the measurement.

ON or 1 - The phase compensation state is not applied to the measurement.

Couplings

None

Examples

NR5G:PCOM ON */Sets the EMF measurement mode to ON

Query Syntax

NR5G:PCOM?

Return Type

Booleon

Default

ON