[:SENSe]:NR5G:SSBCase <char>

(Read-Write) Set and query the signal SSB case.

See also, physical layer procedures for control (3GPP TS 38.213 version 15.7.0 Release 15) Section 4.1.

Relevant Modes

5G NR

Parameters

<char>

Set the SSB case value. Choose from:

Auto - (default) Auto-determine the SSB case based on the current SCS (assumes the signal is standard compliant). Note that the SSB case can be determined for all SCS except 30 kHz (you must manually select SSB Case B or C for an accurate measurement).

A - Case A

B - Case B

C - Case C

D - Case D

E - Case E

Couplings

None

Examples

NR5G:SSBC B */Sets the SSB to Case B

Query Syntax

NR5G:SSBC?

Return Type

character

Default

Auto