TRIGger:OUT:ENABle <bool>

(Read-Write) Set and query the trigger output signal mode. This feature operates only in external point mode triggering. It pulses the trigger output port upon completing the current point acquisition and is used for handshaking with external hardware, complementing the point trigger input.

Note: This feature is only supported on Caraon and later models due to hardware limitations in legacy version.

Relevant Modes

NA

Parameters

<bool>

Choose from:

Examples

TRIG:OUT:ENAB 1 */Enable trigger output signal 

Query Syntax

TRIG:OUT:ENAB? */Query the trigger output signal mode status

Return Type

Boolean

Default

0