Description

Adjusts the list of paths (port pairings) for which isolation standards will be measured during calibration.

 VB Syntax

guidedCal.SetIsolationPaths specifier, pathList

Variable

(Type) - Description

obj

Any of the following:

GuidedCalibration (object)

specifier

(Enum) - Choose from:

0 - naPathsAll - Measure isolation on all pairings of the ports that are to be calibrated.

1 - naPathsNone - Do not measure isolation on any pairing of the ports to be calibrated.

2 - naPathsAdd - Add one or more specific pairings of ports to the list of port pairings for which isolation will be measured.

3 - naPathsRemove - Remove one or more specific pairings of ports from the list of port pairings for which isolation will be measured.

pathlist

(Variant)  port numbers in pairs.  One-dimensional array of Long Integers.

Note: pathList is evaluated only when specifier is naPathsAdd or naPathsRemove.  For naPathsAll and naPathsNone, pathList is ignored.

Return Type

Not Applicable

Default

Not Applicable

Examples

Dim pathList
'selecting to measure isolation on all possible paths for the ports about to be calibrated
guidedCal.SetIsolationPaths naPathsAll, pathList

'now removing the paths 1-to-2, 2-to-3 and 2-to-4 from the set of all paths
pathList = Array(1,2,2,3,2,4)
guidedCal.SetIsolationPaths naPathsRemove, pathList

C++ Syntax

HRESULT SetIsolationPaths(enum NAPortPathSpecifier specifier, VARIANT pathList);

Interface

IGuidedCalibration3