Sense:Roscillator Command

Learn about the Reference Osc.

See the rear-panel 10 MHz connector.

SENSe:ROSCillator:SOURce?

(Read-only) Applying a 10 MHz signal to the Reference Oscillator connector automatically sets the Reference Oscillator to EXTernal. This command allows you to check that it worked.

  • EXT is returned when a signal is present at the 10 MHz Reference Oscillator connector.

  • INT is returned when NO signal is present at the 10 MHz Reference Oscillator connector.

Examples

SENS:ROSC:SOUR?
sense:roscillator:source?

Return Type

Character

Default

Not applicable