Description
There can be two test sets connected and controlled by the VNA at any time.
The item number in the testsets collection is set by the DIP switches on the test set rear-panel. The valid item numbers are 1 and 2. If the test set DIP switches are set to 1, then item number in the collection is 1, and so forth. See your E5091A documentation for more information.
If the specified test set is not connected to USB or not ON, then setting Enabled = True will return an error. All other properties can be set when the test set is not connected.
Child of the Application Object. Get a handle to a E5091Testset object by specifying an item of the collection.
Dim pna
Set pna = CreateObject("AgilentPNA835x.Application")
Dim testsets As E5091Testsets
Set testsets = pna.E5091Testsets
Dim tset1 As E5091Testset
Set tset1 = testsets(1)
TestsetControl Object (for different test sets)
Methods |
Description |
|---|---|
|
None |
|
Properties |
Description |
|
Sets the control lines of the specified E5091A. |
|
|
Enables and disables (ON/OFF) the port mapping and control line output of the specified testset. |
|
|
Returns the test set ID number. |
|
|
Reads the number of ports (7 or 9) that are on the specified E5091A test set. |
|
|
Switches an input to one of the valid outputs on the specified E5091A. |
|
|
Turns ON and OFF the display of the test set control status bar. |
|
Interface |
Introduced with VNA Rev: |
|
IE5091Testset |
5.2 |