When you use the PXIe VNA, you can control the PXIe switch module through the VNA firmware. The following commands are available when the launcher includes the PXIe switch module.
|
SENSe:SWITch :L8990M | :CHAR | :ABORt | :CKIT | :SELect | :INIT | :SAVE | :STEP | :ACQ | :COUNt? | :DESC? | :LOAD | :PATH | :DEEMbed | :CALSet | :NAME | :STATe | :STIMulus | :STATe | :VNA | :PORT | :PORT | :LABel | :COUNt? | :MODule | :CHASsis | :SLOT :M9155 | :COUNt? | :MODule | :CHASsis | :SLOT :M9156 | :COUNt? | :MODule | :CHASsis | :SLOT :M9157 | :COUNt? | :MODule | :CHASsis | :SLOT :M9164 | :COUNt? | :MODule | :CHASsis | :SLOT | :MODel? :M9165 | :COUNt? | :MODule | :CHASsis | :SLOT | :MODel? :P9164 | :COUNt? | :MODule | :CHASsis | :SLOT | :MODel? :P9165 | :COUNt? | :MODule | :CHASsis | :SLOT | :MODel? |
Click on a keyword to view the command details.
|
Applicable Models: All VNAs with option 011 (Write Only) Aborts current switch matrix characterization. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<devname> |
String. Device Name for L8990M. |
|
Examples |
SENS:SWIT:L8990M:CHAR:ABOR 'L8990MUSBTDR' |
|
Query Syntax |
Not applicable |
|
Return Type |
Not applicable |
|
Default |
Not applicable |
|
Applicable Models: All VNAs with option 011 (Read-Write) Sets and returns the ECal model name. The ECal model is used for switch matrix characterization. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<devname> |
String. Device Name for the Switch Matrix. |
|
<ecalName> |
String. ECal model name, e.g. “N4433D”, “N4691D”, “N4692D”, “N4693D”, “N4694D”. |
|
Examples |
SENS:SWIT:L8990M:CHAR:CKIT:SEL 'DEVICE0','N4433D' |
|
Query Syntax |
SENS:SWIT:L8990M:CHAR:CKIT:SEL? 'Device0' |
|
Return Type |
String |
|
Default |
Not applicable |
|
Applicable Models: All VNAs with option 011 (Write Only) Initiates a guided switch matrix characterization. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<devname> |
String. Device Name for L8990M. |
|
<calset> |
String. Tier1 Cal Set Name. |
|
Examples |
SENS:SWIT:L8990M:CHAR:INIT 'L8990MUSBTDR','L8990Mtier1' sense:switch:L8990M:char:init 'L8990MUSBTDR', 'L8990Mtier1' |
|
Query Syntax |
Not applicable |
|
Return Type |
Not applicable |
|
Default |
Not applicable |
|
Applicable Models: All VNAs with option 011 (Write Only) Completes current switch matrix characterization, S2P files saved. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<devname> |
String. Device Name for L8990M. |
|
Examples |
SENS:SWIT:L8990M:CHAR:SAVE 'L8990MUSBTDR' |
|
Query Syntax |
Not applicable |
|
Return Type |
Not applicable |
|
Default |
Not applicable |
|
Applicable Models: All VNAs with option 011 (Write Only) Initiates the measurement of the specified characterization step. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<num> |
step number |
|
<devname> |
String. Device Name for L8990M. |
|
Examples |
SENS:SWIT:L8990M:CHAR:STEP2:ACQ 'L8990MUSBTDR' |
|
Query Syntax |
Not applicable |
|
Return Type |
Not applicable |
|
Default |
Not applicable |
|
Applicable Models: All VNAs with option 011 (Read-only) Returns the number of measurement steps required to complete the current guided switch matrix characterization. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<devname> |
String. Device Name for L8990M. |
|
Examples |
SENS:SWIT:L8990M:CHAR:STEP:COUN? 'L8990MUSBTDR' |
|
Return Type |
Numeric |
|
Default |
Not applicable |
|
Applicable Models: All VNAs with option 011 (Read-only) Returns the step description. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<num> |
step number |
|
<devname> |
String. Device Name for L8990M. |
|
Examples |
SENS:SWIT:L8990M:CHAR:STEP1:DESC? 'L8990MUSBTDR' sense:switch:L8990M:char:step2:desc 'L8990MUSBTDR' |
|
Return Type |
Character |
|
Default |
Not applicable |
|
Applicable Models: All VNAs with option 011 (Write Only) Load a switch config .swp file (actually in xml format), which is saved from the “External Switch Matrix” properties dialog. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<devname> |
String. Device Name for L8990M. |
|
<swpFileName> |
String.File name for the .swp file. |
|
Examples |
SENS:SWIT:L8990M:LOAD 'L8990MUSBTDR','L8990MCONFIG' sense:switch:L8990M:load 'L8990MUSBTDR','L8990MCONFIG' |
|
Query Syntax |
Not applicable |
|
Return Type |
Not applicable |
|
Default |
Not applicable |
|
Applicable Models: All VNAs with option 011 (Write Only) Sets switch matrix positions, let VNA ports thru to the switch test ports in the specified order. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<devname> |
String. Device Name for L8990M. |
|
<num>,[<num>,<num>,<num>] |
switch test port numbers. They are mapped to the order of VNA port list, which can be returned by command SENS:SWIT:L8990M:PATH:VNA:PORT:CAT? |
|
Examples |
SENS:SWIT:L8990M:PATH L8990MUSBTDR, 1,2,3,4 |
|
Query Syntax |
Not applicable |
|
Return Type |
Not applicable |
|
Default |
Not applicable |
|
Applicable Models: All VNAs with option 011 (Read-Write) Sets Tier 1 Cal Set name. |
||
|
Parameters |
|
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
|
<devname> |
String. Device Name for L8990M. |
|
|
<calset> |
String. Tier1 Cal Set Name. |
|
|
Examples |
SENS:SWIT:L8990M:PATH:DEEM:CALS:NAME 'L8990MUSBTDR','L8990Mtier1' sense2:switch:L8990M:path:deembed:calset:name 'L8990MUSBTDR','L8990Mtier1' |
|
|
Query Syntax |
|
|
|
Return Type |
Character |
|
|
Default |
Not applicable |
|
|
Applicable Models: All VNAs with option 011 (Read-Write) Sets and returns enable de-embedding state. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<devname> |
String. Device Name for L8990M. |
|
<char> |
De-embedding state. Choose from: ON – enable de-embedding state OFF – Disable de-embedding state |
|
Examples |
SENS:SWIT:L8990M:PATH:DEEM:CALS:STAT 'L8990MUSBTDR',ON sense:switch:L8990M:path:deembed:calset:state 'L8990MUSBTDR',OFF |
|
Query Syntax |
SENSe<cnum>:SWITch:L8990M:PATH:DEEMbed:CALSet:STATe? |
|
Return Type |
Character |
|
Default |
OFF |
|
Applicable Models: All VNAs with option 011 (Read-Write) Should the Cal Set stimulus values be applied to the channel. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<devname> |
String. Device Name for L8990M. |
|
<char> |
ON – Apply Cal Set stimulus values to the channel OFF – Cal Set stimulus values will not applied to the channel |
|
Examples |
SENS:SWIT:L8990M:PATH:DEEM:CALS:STIM:STAT 'L8990MUSBTDR',ON sense:switch:L8990M:path:deembed:calset:stimulus:state 'L8990MUSBTDR',OFF |
|
Query Syntax |
SENSe<cnum>:SWITch:L8990M:PATH:DEEMbed:CALSet:STIMulus:STATe? |
|
Return Type |
Character |
|
Default |
OFF |
|
Applicable Models: All VNAs with option 011 (Read-Write) Sets and returns port label on each switch test port. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<pnum> |
Port numbers. |
|
<devname> |
String. Device Name for L8990M. |
|
<portLabel> |
String. Port Label. |
|
Examples |
SENS:SWIT:L8990M:PORT:LAB 'L8990MUSBTDR','TX1(L)' sense:switch:L8990M:path2:label 'L8990MUSBTDR','TX1(L)' |
|
Query Syntax |
SENSe<cnum>:SWITch:L8990M:PATH:DEEMbed:CALSet:STIMulus:STATe? |
|
Return Type |
Character |
|
Default |
Not applicable |
|
Applicable Models: All VNAs with option 011 (Read-only) Returns the configured VNA port list. For example, if VNA port 1,2,3 and 4 are configured, it returns “1,2,3,4”; if VNA port 1 and 3 are configured, it returns “1,3”; if only VNA port 1 is configured, it returns “1”. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. This command is common for all channels and the setting is ignored. |
|
<devname> |
String. Device Name for L8990M. |
|
Examples |
SENS:SWIT:L8990M:PATH:VNA:PORT:CAT? |
|
Return Type |
Comma-separated string |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read-only) Returns the total number of M9161D switch modules that are connected to the VNA firmware. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. This command is common for all channels and the setting is ignored. |
|
Examples |
SENS:SWIT:M9161:COUN? |
|
Return Type |
Numeric |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read Only) Returns the chassis number where the specified M9161D module is located. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. This command is common for all channels and the setting is ignored. |
|
<mod> |
Module number of M9161D. The number starts from 1 for the left most module of M9161D. |
|
Examples |
SENS:SWIT:M9161:MOD1:CHAS? sense:SWITch:m9161:module2:chassis? |
|
Return Type |
Numeric |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read-Write) Sets and reads the status of M9161D control. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<mod> |
Module number of M9161D. The number starts from 1 for the leftmost module of M9161D. |
|
<bool> |
Module control state. Choose from: O or OFF - Skips to control the M9161D at the specified channel. 1 or ON - Enables to control the M9161D at the specified channel. |
|
Examples |
SENS:SWIT:M9161:MOD1:CONT ON sense2:SWITch:M9161:module2:control 0 |
|
Query Syntax |
SENSe<cnum>:SWITch:M9161:MODule<mod>:CONTrol[:STATe]? |
|
Return Type |
Boolean |
|
Default |
1 or ON |
|
Applicable Models: All PXIe VNAs (Write Only) Resets the switches in the specified module to "All Open" state immediately. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. This command is common for all channels and the setting is ignored. |
|
<mod> |
Module number of M9161D. The number starts from 1 for the leftmost module of M9161D. |
|
Examples |
SENS:SWIT:M9161:MOD1:RES:IMM sense:SWITch:M9161:module2:reset:immediate |
|
Query Syntax |
Not applicable |
|
Return Type |
Not applicable |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read Only) Reads the slot number where the specified M9161D is located. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. This command is common for all channels and the setting is ignored. |
|
<mod> |
Module number of M9161D. The number starts from 1 for the leftmost module of M9161D. |
|
Examples |
SENS:SWIT:M9161:MOD1:SLOT? sense:SWITch:M9161:module2:slot? |
|
Return Type |
Numeric |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read-Write) Sets and reads the path for the M9161D switch. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<mod> |
Module number of M9161D. The number starts from 1 for the left most module of M9161D. |
|
<char> |
Path. Choose from: STATe1 to STATe4 - State 1 to 4 NFSource - NF source switch (NF measurement only) NFLO - NF LO switch (Option 720 only) NFReceiver - NF receiver switch (NF measurement only) |
|
Examples |
SENS:SWIT:M9161:MOD1:SWIT:PATH STAT1 sense2:SWITch:M9161:module2:switch:path state4 |
|
Query Syntax |
SENSe<cnum>:SWITch:M9161:MODule<mod>:SWITch:PATH? |
|
Return Type |
<char> |
|
Default |
STATe1 |
|
Applicable Models: All PXIe VNAs (Read-Write) Lists the path of the M9161D for SENS:SWIT:M9161:MOD:SWIT:PATH. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<mod> |
Module number of M9161D. The number starts from 1 for the left most module of M9161D. |
|
Examples |
SENS:SWIT:M9161:MOD1:SWIT:PATH:CAT? sense2:SWITch:M9161:module2:switch:path:catalog? |
|
Query Syntax |
SENSe<cnum>:SWITch:M9161:MODule<mod>:SWITch:PATH:CAT? |
|
Return Type |
Comma-separated string |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read-only) Returns the total number of M9155C/M9155CH40 switch modules that are connected to the VNA firmware. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. This command is common for all channels and the setting is ignored. |
|
Examples |
SENS:SWIT:M9155:COUN? |
|
Return Type |
Numeric |
|
Default |
|
|
Applicable Models: All PXIe VNAs (Read Only) Returns the chassis number where the specified M9155C/M9155CH40 module is located. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. This command is common for all channels and the setting is ignored. |
|
<mod> |
Module number of M9155C/M9155CH40. The number starts from 1 for the left most module of M9155C/M9155CH40. |
|
Examples |
SENS:SWIT:M9155:MOD1:CHAS? sense:SWITch:m9155:module2:chassis? |
|
Return Type |
Numeric |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read-Write) Sets and reads the status of M9155C/M9155CH40 control. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<mod> |
Module number of M9155C/M9155CH40. The number starts from 1 for the leftmost module of M9155C/M9155CH40. |
|
<bool> |
Module control state. Choose from: O or OFF - Skips to control the M9155C/M9155CH40 at the specified channel. 1 or ON - Enables to control the M9155C/M9155CH40 at the specified channel. |
|
Examples |
SENS:SWIT:M9155:MOD1:CONT ON sense2:SWITch:M9155:module2:control 0 |
|
Query Syntax |
SENSe<cnum>:SWITch:M9155:MODule<mod>:CONTrol[:STATe]? |
|
Return Type |
Boolean |
|
Default |
1 or ON |
|
Applicable Models: All PXIe VNAs (Write Only) Resets the switches in the specified module to "All Open" state immediately. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. This command is common for all channels and the setting is ignored. |
|
<mod> |
Module number of M9155C/M9155CH40 The number starts from 1 for the leftmost module of M9155C/M9155CH40. |
|
Examples |
SENS:SWIT:M9155:MOD1:RES:IMM sense:SWITch:M9155:module2:reset:immediate |
|
Query Syntax |
Not applicable |
|
Return Type |
Not applicable |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read Only) Reads the slot number where the specified M9155C/M9155CH40 is located. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. This command is common for all channels and the setting is ignored. |
|
<mod> |
Module number of M9155C/M9155CH40 The number starts from 1 for the leftmost module of M9155C/M9155CH40. |
|
Examples |
SENS:SWIT:M9155:MOD1:SLOT? sense:SWITch:M9155:module2:slot? |
|
Return Type |
Numeric |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read-Write) Sets and reads the path for the M9155C/M9155CH40 switch. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<mod> |
Module number of M9155C/M9155CH40. The number starts from 1 for the left most module of M9155C/M9155CH40. |
|
<char> |
Path. Choose from: STATe1 or STATe2 - State 1 or 2 NFSource - NF source switch (NF measurement only) NFLO - NF LO switch (Option 720 only) NFReceiver - NF receiver switch (NF measurement only) |
|
Examples |
SENS:SWIT:M9155:MOD1:SWIT:PATH STAT1 sense2:SWITch:M9155:module2:switch:path state2 |
|
Query Syntax |
SENSe<cnum>:SWITch:M9155:MODule<mod>:SWITch:PATH? |
|
Return Type |
<char> |
|
Default |
STATe1 |
|
Applicable Models: All PXIe VNAs (Read-Write) Lists the path of the M9155C/M9155CH40 for SENS:SWIT:M9155:MOD:SWIT:PATH. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<mod> |
Module number of M9155C/M9155CH40. The number starts from 1 for the left most module of M9155C/M9155CH40. |
|
Examples |
SENS:SWIT:M9155:MOD1:SWIT:PATH:CAT? sense2:SWITch:M9155:module2:switch:path:catalog? |
|
Query Syntax |
SENSe<cnum>:SWITch:M9155:MODule<mod>:SWITch:PATH:CAT? |
|
Return Type |
Comma-separated string |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read-only) Returns the total number of M9156C/M9156CH40 switch modules that are connected to the VNA firmware. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. This command is common for all channels and the setting is ignored. |
|
Examples |
SENS:SWIT:M9156:COUN? |
|
Return Type |
Numeric |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read Only) Returns the chassis number where the specified M9156C/M9156CH40 module is located. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. This command is common for all channels and the setting is ignored. |
|
<mod> |
Module number of M9156C/M9156CH40. The number starts from 1 for the left most module of M9156C/M9156CH40. |
|
Examples |
SENS:SWIT:M9156:MOD1:CHAS? sense:SWITch:m9156:module2:chassis? |
|
Return Type |
Numeric |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read-Write) Sets and reads the status of M9156C/M9156CH40 control. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<mod> |
Module number of M9156C/M9156CH4. The number starts from 1 for the leftmost module of M9156C/M9156CH40. |
|
<bool> |
Module control state. Choose from: O or OFF - Skips to control the M9165C/M9156CH40 at the specified channel. 1 or ON - Enables to control the M9156C/M9156CH40 at the specified channel. |
|
Examples |
SENS:SWIT:M9156:MOD1:CONT ON sense2:SWITch:M9156:module2:control 0 |
|
Query Syntax |
SENSe<cnum>:SWITch:M9156:MODule<mod>:CONTrol[:STATe]? |
|
Return Type |
Boolean |
|
Default |
1 or ON |
|
Applicable Models: All PXIe VNAs (Write Only) Resets the switches in the specified module to "All Open" state immediately. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. This command is common for all channels and the setting is ignored. |
|
<mod> |
Module number of M9156C/M9156CH40 The number starts from 1 for the leftmost module of M9156C/M9156CH40. |
|
Examples |
SENS:SWIT:M9156:MOD1:RES:IMM sense:SWITch:M9156:module2:reset:immediate |
|
Query Syntax |
Not applicable |
|
Return Type |
Not applicable |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read Only) Reads the slot number where the specified M9156C/M9155CH40 is located. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. This command is common for all channels and the setting is ignored. |
|
<mod> |
Module number of M9156C/M9156CH40 The number starts from 1 for the leftmost module of M9156C/M9156CH40. |
|
Examples |
SENS:SWIT:M9156:MOD1:SLOT? sense:SWITch:M9156:module2:slot? |
|
Return Type |
Numeric |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read-Write) Sets and reads the path for the M9156C/M9156CH40 switch. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<mod> |
Module number of M9156C/M9156CH40. The number starts from 1 for the left most module of M9156C/M9156CH40. |
|
<char> |
Path. Choose from: STATe1 or STATe2 - State 1 or 2 NFSource - NF source switch (NF measurement only) NFLO - NF LO switch (Option 720 only) NFReceiver - NF receiver switch (NF measurement only) |
|
Examples |
SENS:SWIT:M9156:MOD1:SWIT:PATH STAT1 sense2:SWITch:M9156:module2:switch:path state2 |
|
Query Syntax |
SENSe<cnum>:SWITch:M9156:MODule<mod>:SWITch:PATH? |
|
Return Type |
<char> |
|
Default |
STATe1 |
|
Applicable Models: All PXIe VNAs (Read-Write) Lists the path of the M9156C/M9156CH40 for SENS:SWIT:M9156:MOD:SWIT:PATH. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<mod> |
Module number of M9156C/M9156CH40. The number starts from 1 for the left most module of M9156C/M9156CH40. |
|
Examples |
SENS:SWIT:M9156:MOD1:SWIT:PATH:CAT? sense2:SWITch:M9156:module2:switch:path:catalog? |
|
Query Syntax |
SENSe<cnum>:SWITch:M9156:MODule<mod>:SWITch:PATH:CAT? |
|
Return Type |
Comma-separated string |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read-only) Returns the total number of M9157C/M9157CH40 switch modules that are connected to the VNA firmware. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. This command is common for all channels and the setting is ignored. |
|
Examples |
SENS:SWIT:M9157:COUN? |
|
Return Type |
Numeric |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read Only) Returns the chassis number where the specified M9157C/M9157CH40 module is located. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. This command is common for all channels and the setting is ignored. |
|
<mod> |
Module number of M9157C/M9157CH40. The number starts from 1 for the left most module of M9157C/M9157CH40. |
|
Examples |
SENS:SWIT:M9157:MOD1:CHAS? sense:SWITch:m9157:module2:chassis? |
|
Return Type |
Numeric |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read-Write) Sets and reads the status of M9157C/M9157CH40 control. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<mod> |
Module number of M9157C/M9157CH4. The number starts from 1 for the leftmost module of M9157C/M9157CH40. |
|
<bool> |
Module control state. Choose from: O or OFF - Skips to control the M9167C/M9157CH40 at the specified channel. 1 or ON - Enables to control the M9157C/M9157CH40 at the specified channel. |
|
Examples |
SENS:SWIT:M9157:MOD1:CONT ON sense2:SWITch:M9157:module2:control 0 |
|
Query Syntax |
SENSe<cnum>:SWITch:M9157:MODule<mod>:CONTrol[:STATe]? |
|
Return Type |
Boolean |
|
Default |
1 or ON |
|
Applicable Models: All PXIe VNAs (Write Only) Resets the switches in the specified module to "All Open" state immediately. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. This command is common for all channels and the setting is ignored. |
|
<mod> |
Module number of M9157C/M9157CH40. The number starts from 1 for the leftmost module of M9157C/M9157CH40. |
|
Examples |
SENS:SWIT:M9157:MOD1:RES:IMM sense:SWITch:M9157:module2:reset:immediate |
|
Query Syntax |
Not applicable |
|
Return Type |
Not applicable |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read Only) Reads the slot number where the specified M9157C/M9157CH40 is located. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. This command is common for all channels and the setting is ignored. |
|
<mod> |
Module number of M9157C/M9157CH40 The number starts from 1 for the leftmost module of M9157C/M9157CH40. |
|
Examples |
SENS:SWIT:M9157:MOD1:SLOT? sense:SWITch:M9157:module2:slot? |
|
Return Type |
Numeric |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read-Write) Sets and reads the path for the M9157C/M9157CH40 switch. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<mod> |
Module number of M9157C/M9157CH40. The number starts from 1 for the left most module of M9157C/M9157CH40. |
|
<char> |
Path. Choose from: STATe1 to STATe6 - State 1 to 6 NFSource - NF source switch (NF measurement only) NFLO - NF LO switch (Option 720 only) NFReceiver - NF receiver switch (NF measurement only) |
|
Examples |
SENS:SWIT:M9157:MOD1:SWIT:PATH STAT1 sense2:SWITch:M9157:module2:switch:path state2 |
|
Query Syntax |
SENSe<cnum>:SWITch:M9157:MODule<mod>:SWITch:PATH? |
|
Return Type |
<char> |
|
Default |
STATe1 |
|
Applicable Models: All PXIe VNAs (Read-Write) Lists the path of the M9157C/M9157CH40 for SENS:SWIT:M9157:MOD:SWIT:PATH. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<mod> |
Module number of M9157C/M9157CH40. The number starts from 1 for the left most module of M9157C/M9157CH40. |
|
Examples |
SENS:SWIT:M9157:MOD1:SWIT:PATH:CAT? sense2:SWITch:M9157:module2:switch:path:catalog? |
|
Query Syntax |
SENSe<cnum>:SWITch:M9157:MODule<mod>:SWITch:PATH:CAT? |
|
Return Type |
Comma-separated string |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read-only) Returns the total number of M9164x switch modules that are connected to the VNA firmware. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. This command is common for all channels and the setting is ignored. |
|
Examples |
SENS:SWIT:M9164:COUN? sense:switch:m9164:count |
|
Return Type |
Numeric |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read Only) Returns the chassis number where the specified M9164x module is located. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. This command is common for all channels and the setting is ignored. |
|
<mod> |
Module number of M9164x. The number starts from 1 for the left most module of M9164x. |
|
Examples |
SENS:SWIT:M9164:MOD1:CHAS? sense:SWITch:m9164:module2:chassis? |
|
Return Type |
Numeric |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read-Write) Sets and reads the status of M9164x control. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<mod> |
Module number of M9164x. The number starts from 1 for the left most module of M9164x. |
|
<bool> |
Module control state. Choose from: O or OFF - Skips to control the M9164x at the specified channel. 1 or ON - Enables to control the M9164x at the specified channel. |
|
Examples |
SENS:SWIT:M9164:MOD1:CONT ON sense2:SWITch:M9164:module2:control 0 |
|
Query Syntax |
SENSe<cnum>:SWITch:M9164:MODule<mod>:CONTrol[:STATe]? |
|
Return Type |
Boolean |
|
Default |
1 or ON |
|
Applicable Models: All PXIe VNAs (Write Only) Resets the switches in the specified module to "All Open" state immediately. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. This command is common for all channels and the setting is ignored. |
|
<mod> |
Module number of M9164x. The number starts from 1 for the left most module of M9164x. |
|
Examples |
SENS:SWIT:M9164:MOD1:RES:IMM sense:SWITch:M9164:module2:reset:immediate |
|
Query Syntax |
Not applicable |
|
Return Type |
Not applicable |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read Only) Reads the slot number where the specified M9164x is located. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. This command is common for all channels and the setting is ignored. |
|
<mod> |
Module number of M9164x. The number starts from 1 for the left most module of M9164x. |
|
Examples |
SENS:SWIT:M9164:MOD1:SLOT? sense:SWITch:M9164:module2:slot? |
|
Return Type |
Numeric |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read-Write) Sets and reads the path for the M9164x switch. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<mod> |
Module number of M9164x. The number starts from 1 for the left most module of M9164x. |
|
<char> |
Path. Choose from: STATe0 to STATe16 - State 0 to 16 |
|
Examples |
SENS:SWIT:M9164:MOD1:SWIT:PATH STAT1 sense2:SWITch:M9164:module2:switch:path state4 |
|
Query Syntax |
SENSe<cnum>:SWITch:M9164:MODule<mod>:SWITch:PATH? |
|
Return Type |
<enum> |
|
Default |
STATe1 or STATe2 |
|
Applicable Models: All PXIe VNAs (Read Only) Returns the model number of M9164x. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<mod> |
Module number of M9164x. The number starts from 1 for the left most module of M9164x |
|
Examples |
SENS:SWIT:M9164:MOD1:MOD? sense:SWITch:M9164:module2:model? |
|
Return Type |
string |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read-only) Returns the total number of M9165x switch modules that are connected to the VNA firmware. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. This command is common for all channels and the setting is ignored. |
|
Examples |
SENS:SWIT:M9165:COUN? |
|
Return Type |
Numeric |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read Only) Returns the chassis number where the specified M9165x module is located. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. This command is common for all channels and the setting is ignored. |
|
<mod> |
Module number of M9165x. The number starts from 1 for the left most module of M9165x. |
|
Examples |
SENS:SWIT:M9165:MOD1:CHAS? sense:SWITch:m9165:module2:chassis? |
|
Return Type |
Numeric |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read-Write) Sets and reads the status of M9165x control. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<mod> |
Module number of M9165x. The number starts from 1 for the left most module of M9165x. |
|
<bool> |
Module control state. Choose from: O or OFF - Skips to control the M9165x at the specified channel. 1 or ON - Enables to control the M9165x at the specified channel. |
|
Examples |
SENS:SWIT:M9165:MOD1:CONT ON sense2:SWITch:M9165:module2:control 0 |
|
Query Syntax |
SENSe<cnum>:SWITch:M9165:MODule<mod>:CONTrol[:STATe]? |
|
Return Type |
Boolean |
|
Default |
1 or ON |
|
Applicable Models: All PXIe VNAs (Write Only) Resets the switches in the specified module to "All Open" state immediately. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. This command is common for all channels and the setting is ignored. |
|
<mod> |
Module number of M9165x. The number starts from 1 for the left most module of M9165x. |
|
Examples |
SENS:SWIT:M9165:MOD1:RES:IMM sense:SWITch:M9165:module2:reset:immediate |
|
Query Syntax |
Not applicable |
|
Return Type |
Not applicable |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read Only) Reads the slot number where the specified M9165x is located. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. This command is common for all channels and the setting is ignored. |
|
<mod> |
Module number of M9165x. The number starts from 1 for the left most module of M9165x. |
|
Examples |
SENS:SWIT:M9165:MOD1:SLOT? sense:SWITch:M9165:module2:slot? |
|
Return Type |
Numeric |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read-Write) Sets and reads the path for the M9165x switch. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<mod> |
Module number of M9165x. The number starts from 1 for the left most module of M9165x. |
|
<char> |
Path. Choose from: STATe0 to STATe16 - State 0 to 16 |
|
Examples |
SENS:SWIT:M9165:MOD1:SWIT:PATH STAT1 sense2:SWITch:M9165:module2:switch:path state4 |
|
Query Syntax |
SENSe<cnum>:SWITch:M9165:MODule<mod>:SWITch:PATH? |
|
Return Type |
<enum> |
|
Default |
STATe1 or STATe2 |
|
Applicable Models: All PXIe VNAs (Read Only) Returns the model number of M9165x. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<mod> |
Module number of M9165x. The number starts from 1 for the left most module of M9165x |
|
Examples |
SENS:SWIT:M9165:MOD1:MOD? sense:SWITch:M9165:module2:model? |
|
Return Type |
string |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read-only) Returns the total number of P9164x switch modules that are connected to the VNA firmware. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. This command is common for all channels and the setting is ignored. |
|
Examples |
SENS:SWIT:P9164:COUN? |
|
Return Type |
Numeric |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read Only) Returns the chassis number where the specified P9164x module is located. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. This command is common for all channels and the setting is ignored. |
|
<mod> |
Module number of P9164x. The number starts from 1 for the left most module of P9164x. |
|
Examples |
SENS:SWIT:P9164:MOD1:CHAS? sense:SWITch:p9164:module2:chassis? |
|
Return Type |
Numeric |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read-Write) Sets and reads the status of P9164x control. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<mod> |
Module number of P9164x. The number starts from 1 for the left most module of P9164x. |
|
<bool> |
Module control state. Choose from: O or OFF - Skips to control the P9164x at the specified channel. 1 or ON - Enables to control the P9164x at the specified channel. |
|
Examples |
SENS:SWIT:P9164:MOD1:CONT ON sense2:SWITch:p9164:module2:control 0 |
|
Query Syntax |
SENSe<cnum>:SWITch:P9164:MODule<mod>:CONTrol[:STATe]? |
|
Return Type |
Boolean |
|
Default |
1 or ON |
|
Applicable Models: All PXIe VNAs (Read Only) Reads the slot number where the specified P9164x is located. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. This command is common for all channels and the setting is ignored. |
|
<mod> |
Module number of P9164x. The number starts from 1 for the left most module of P9164x. |
|
Examples |
SENS:SWIT:P9164:MOD1:SLOT? sense:SWITch:p9164:module2:slot? |
|
Return Type |
Numeric |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read-Write) Sets and reads the path for the P9164x switch. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<mod> |
Module number of P9164x. The number starts from 1 for the left most module of P9164x. |
|
<char> |
Path. Choose from: STATe0 to STATe16 - State 0 to 16 |
|
Examples |
SENS:SWIT:P9164:MOD1:SWIT:PATH STAT1 sense2:SWITch:p9164:module2:switch:path state4 |
|
Query Syntax |
SENSe<cnum>:SWITch:P9164:MODule<mod>:SWITch:PATH? |
|
Return Type |
<enum> |
|
Default |
STATe1 or STATe2 |
|
Applicable Models: All PXIe VNAs (Read Only) Returns the model number of P9164x. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<mod> |
Module number of P9164x. The number starts from 1 for the left most module of P9164x |
|
Examples |
SENS:SWIT:P9164:MOD1:MOD? sense:SWITch:p9164:module2:model? |
|
Return Type |
string |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read-only) Returns the total number of P9165x switch modules that are connected to the VNA firmware. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. This command is common for all channels and the setting is ignored. |
|
Examples |
SENS:SWIT:P9165:COUN? |
|
Return Type |
Numeric |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read Only) Returns the chassis number where the specified P9165x module is located. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. This command is common for all channels and the setting is ignored. |
|
<mod> |
Module number of P9165x. The number starts from 1 for the left most module ofP9165x. |
|
Examples |
SENS:SWIT:P9165:MOD1:CHAS? sense:SWITch:p9165:module2:chassis? |
|
Return Type |
Numeric |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read-Write) Sets and reads the status of P9165x control. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<mod> |
Module number of P9165x. The number starts from 1 for the left most module of P9165x. |
|
<bool> |
Module control state. Choose from: O or OFF - Skips to control the P9165x at the specified channel. 1 or ON - Enables to control the P9165x at the specified channel. |
|
Examples |
SENS:SWIT:P9165:MOD1:CONT ON sense2:SWITch:p9165:module2:control 0 |
|
Query Syntax |
SENSe<cnum>:SWITch:P9165:MODule<mod>:CONTrol[:STATe]? |
|
Return Type |
Boolean |
|
Default |
1 or ON |
|
Applicable Models: All PXIe VNAs (Read Only) Reads the slot number where the specifiedP9165x is located. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. This command is common for all channels and the setting is ignored. |
|
<mod> |
Module number of P9165x. The number starts from 1 for the left most module of P9165x. |
|
Examples |
SENS:SWIT:P9165:MOD1:SLOT? sense:SWITch:p9165:module2:slot? |
|
Return Type |
Numeric |
|
Default |
Not applicable |
|
Applicable Models: All PXIe VNAs (Read-Write) Sets and reads the path for the P9165x switch. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<mod> |
Module number of P9165x. The number starts from 1 for the left most module of P9165x. |
|
<char> |
Path. Choose from: STATe0 to STATe16 - State 0 to 16 |
|
Examples |
SENS:SWIT:P9165:MOD1:SWIT:PATH STAT1 sense2:SWITch:p9165:module2:switch:path state4 |
|
Query Syntax |
SENSe<cnum>:SWITch:P9165:MODule<mod>:SWITch:PATH? |
|
Return Type |
<enum> |
|
Default |
STATe1 or STATe2 |
|
Applicable Models: All PXIe VNAs (Read Only) Returns the model number of P9165x. |
|
|
Parameters |
|
|
<cnum> |
Any existing channel number; if unspecified, value is set to 1. |
|
<mod> |
Module number of P9165x. The number starts from 1 for the left most module of P9165x |
|
Examples |
SENS:SWIT:P9165:MOD1:MOD? sense:SWITch:p9165:module2:model? |
|
Return Type |
string |
|
Default |
Not applicable |