Softkey under Setup key

COM Command

SCPI Command

Frequency Band

10M - 41MHz

SCPI.SENSe.PS(Ch).FBANd

:SENSe:PS[Ch]:FBANd BAND1

39M - 101MHz

:SENSe:PS[Ch]:FBANd BAND2

99M - 1.5GHz

:SENSe:PS[Ch]:FBANd BAND3

250M - 7GHz

:SENSe:PS[Ch]:FBANd BAND4

3GHz - 10GHz

:SENSe:PS[Ch]:FBANd BAND5

9GHz - 26.5GHz

:SENSe:PS[Ch]:FBANd BAND6

Nominal Frequency

SCPI.SENSe.PS(Ch).DCONverter.FREQuency

:SENSe:PS[Ch]:DCONverter:FREQuency

Carrier Search

SCPI.SENSe.PS(Ch).DCONverter.SSEarch.EXECute

:SENSe:PS[Ch]:DCONverter:SSEarch:EXECute

IF Gain

SCPI.SENSe.PS(Ch).IFGain

:SENSe:PS[Ch]:IFGain

  LO PhNoise Optimize

L(f)for > 150kHz

SCPI.SENSe.PS(Ch).LOBandwidth

:SENSe:PS[Ch]:LOBandwidth NARR

L(f)for < 150kHz

:SENSe:PS[Ch]:LOBandwidth WIDE

Capture Range

Normal

SCPI.SENSe.PS(Ch).CRANge

:SENSe:PS[Ch]:CRANge NORM

Wide

:SENSe:PS[Ch]:CRANge WIDE

Reference Oscillator

Bandwidth

Narrow

SCPI.SENSe.PS(Ch).ROSCillator.BANDwidth

:SENSe:PS[Ch]:ROSCillator:BANDwidth NARR

Wide

:SENSe:PS[Ch]:ROSCillator:BANDwidth WIDE

Ref. Osc.1 source

internal

SCPI.SENSe.PS(Ch).ROSCillator.REFerence1.SOURce

:SENSe:PS[Ch]:ROSCillator:REFerence1:SOURce INT

Ref. Osc.2 source

External

SCPI.SENSe.PS(Ch).ROSCillator.REFerence1.SOURce

:SENSe:PS[Ch]:ROSCillator:REFerence1:SOURce EXT

Ref. Osc.2 source

internal

SCPI.SENSe.PS(Ch).ROSCillator.REFerence2.SOURce

:SENSe:PS[Ch]:ROSCillator:REFerence2:SOURce INT

Ref. Osc.3 source

External

SCPI.SENSe.PS(Ch).ROSCillator.REFerence2.SOURce

:SENSe:PS[Ch]:ROSCillator:REFerence2:SOURce EXT

  Auto setting

SCPI.SENSe.PS(Ch).ASET

:SENSe:PS(Ch):ASET