If you connect the E5052B to LAN, you can access the hard disk (F drive) in the E5052B as a network drive from an external PC connected to the same LAN.
Other topics about Using Windows
This section shows the procedure to enable the access from the external PC.
Press Save/Recall > Explorer which opens the explorer.
Select (highlight) USER (F:) and then click Properties in the File menu. The USER(F:) Properties dialog box appears.
Select the Sharing tab.
Click New Share. The New Share dialog box appears.
Enter the share name (name used when accessed from the external PC) in the Share Name box and click OK .
In the USER(F:) Properties dialog box, click the OK button.
This section describes the procedure to connect to the hard disk (F drive) in the E5052B to which access has been made possible according to the procedure described in Enabling the access from an external PC from the external PC, taking Windows XP as an example.
For information on connection, see your PC's operation manual.
Right-click start menu, then select Explorer to start the explorer.
From the Explorer's menu, click Tools > Map Network Drive.. The Map Network Drive dialog box appears.
Select an appropriate drive, enter \\C_NAME\S_NAME as the network path and then click the OK button.
The dialog box to enter the user name and the password appears. Enter an appropriate user name and password and then click the OK button.
C_NAME in the network path is the computer name of the E5052B and S_NAME is the share name of the F drive. For information on how to set the computer name, refer to Specifying computer name; for information on how to set the share name, refer to Enabling the access from an external PC.
The user name and password (Default User Name/Password: E5052) differ depending on the setting made when enabling access from the external PC. When you have set them according to Enabling the access from an external PC you can make connection using the user name, E5052, without the password.