Installation Steps: 1 2 3 4 5
To generate signals using the N7637C Signal Studio Pro for mmW WLAN 2018 Update 1.0 software, you must have a properly configured PC and a properly configured instrument, as described in the following tables.
|
Instruments |
Requirements |
|---|---|
|
M8190A arbitrary waveform generator |
Firmware:
Required options:
|
|
M8195A arbitrary waveform generator |
Firmware:
Recommended options:
|
200 GB HDD with 2 GB free disk space at runtime (5 GB or higher recommended)
1024 x 768 screen resolution (1280 x 1024 recommended)
If you use a high-resolution display, the GUI's font size may appear too small to read. To resolve this, lower your PC's display resolution, but make sure the display scaling remains set at 100 percent, otherwise portions of the GUI will become truncated and hidden from view.
Windows 10 (64 bit):
1 GHz or faster
2 GB of memory minimum
1.5 GB hard disk space (includes 1 GB for Microsoft .NET Framework and 65 MB for the Keysight IO Libraries)
Microsoft Internet Explorer 11.0 or later
128 MB graphics memory with DirectX 9 graphics support (recommended)
Windows 7 (64 bit):
1 GHz or faster
2 GB of memory minimum
1.5 GB hard disk space (includes 1 GB for Microsoft .NET Framework and 65 MB for the Keysight IO Libraries)
Microsoft Internet Explorer 11.0 or later
128 MB graphics memory with DirectX 9 graphics support (recommended)
Microsoft .NET Framework 4.6 or later
Keysight IO Libraries, version 18.0 or later
Keysight License Manager (2. Downloading and Installing the Keysight License Manager )
Keysight License Service (included with installer)
Keysight Host Processor Platform (included with installer)
Installed GPIB IO interface card, LAN interface card, or USB/GPIB interface connector
Keysight VISA
Microsoft Windows Installer version 2.0 or later