Click here to view links to Sweep commands for all Measurement Classes.
| Main Tab Commands | |||
| Softkey | Sub-item | SCPI | COM |
| Number of Points | SENSe:SWEep:POINts | NumberOfPoints |
|
X-Axis Type |
CALCulate:MEASure:MIXer:XAXis | ActiveXAxisRange |
|
|
|||
| GCX Setup... |
|
||
| Sweep Timing Tab Commands | |||
| Softkey | Sub-item | SCPI | COM |
| Sweep Time | Auto | SENSe:SWEep:TIME:AUTO | chan.SweepTime |
| Manual | SENSe:SWEep:TIME[:STOP] | chan.SweepTime |
|
| Dwell Time | SENSe:SWEep:DWELl | DwellTime |
|
Sweep Delay |
SENSe:SWEep:DWELl:SDELay | SweepDelay |
|
| Fast Sweep | ON | SENSe:SWEep:SPEed | SweepSpeedMode |
| OFF | SENSe:SWEep:SPEed | SweepSpeedMode |
|
| Source Control Tab Commands | |||
Softkey |
Sub-item | SCPI | COM |
| Pulse Setup... | Pulse Measurement | ||
| Off | SENSe:SWEep:PULSe:MODE | PulseMeasMode |
|
| Standard Pulse | SENSe:SWEep:PULSe:MODE | PulseMeasMode |
|
| Pulse Profile | SENSe:SWEep:PULSe:MODE | PulseMeasMode |
|
| Pulse Timing | |||
| Pulse Width | SENSe:SWEep:PULSe:PRIMary:WIDth | PrimaryWidth |
|
| Pulse Period | SENSe:SWEep:PULSe:PRIMary:PERiod | PrimaryPeriod |
|
| Pulse Frequency | PrimaryFrequency |
||
| Embedded LO... | Embedded LO Mode On | LORangeMode |
|
| Tuning Point | SENSe:MIXer:ELO:NORMalize:POINT | NormalizePoint |
|
| LO Frequency Delta | SENSe:MIXer:ELO:LO:DELTA | LOFrequencyDelta |
|
| Tuning Settings |
|
||
| Broadband and precise | SENSe:MIXer:ELO:TUNing:MODE | TuningMode |
|
| Precise only | None | None |
|
| Disable tuning | None | None |
|
| Sweep Span | BroadbandTuningSpan |
||
| Max Iterations | MaxPreciseTuningIterations |
||
| Tolerance | PreciseTuningTolerance |
||
| Tuning IFBW | TuningIFBW |
||
| Tune every | TuningSweepInterval |
||