FETCh:TDPower

Last updated: 2010-04-26

For more information on the GPIB Command conventions, see GPIB Command conventions

For the measurement, see Dynamic Power (DPOW) Measurement.

FETCh:TDPower[:ALL]?  

Function

Queries an dynamic power measurement result.

This query returns a comma-separated list of values in the following order: Integrity Indicator, power of all measurement steps.

The power of all measurement steps can also be queried by FETCh:TDPower:STEP:POWer[:MEASure]?.

Query

Integrity Indicator (See Integrity Indicator)

Measurement Step Power

  • Range: Measured Value in dBm,  9.91 E+37 (NAN)

  • Resolution: 0.01

Requirements

Test Application Revision: A.02.00 and above

Programming Example

"FETCh:TDPower?"

FETCh:TDPower:INTegrity?

Function

Queries the measurement integrity indicator for the last dynamic power measurement completed.

Zero indicates a normal measurement. See Integrity Indicator for information about non-zero integrity results.

Query

Integrity Indicator (See Integrity Indicator)

Requirements

Test Application Revision: A.02.00 and above

Programming Example

"FETCh:TDPower:INTegrity?"

FETCh:TDPower:STEP:POWer[:MEASure]?  

Function

Queries the measurement step power.

This query returns 300 comma-separated values, in which the valid results are based on Measure Step Number.

Query

  • Range: Measured Value in dBm,  9.91 E+37 (NAN)

  • Resolution: 0.01

Requirements

Test Application Revision: A.02.00 and above

Programming Example

"FETCh:TDPower:STEP:POWer?"

FETCh:TDPower:STEP:POWer:TRIGger?

Function

Queries the trigger step power.

This query returns 10 comma-separated values, in which the valid results are based on Trigger Step Number.

Query

  • Range: Measured Value in dBm,  9.91 E+37 (NAN)

  • Resolution: 0.01

Requirements

Test Application Revision: A.02.00 and above

Programming Example

"FETCh:TDPower:STEP:POWer:TRIGger?"