SETup:FSTability

SETup:FSTability

May 10, 2010

GPIB Command Conventions

SETup:FSTability:CONTinuous

Function	Sets/queries the trigger arm state for the frequency stability measurement. Determines whether measurement will make one measurement then stop (0\|OFF (single)), or automatically rearm upon completion of one measurement and repeat the process (1\|ON (continuous)).
Setting	Range: 1\|ON\|0\|OFF
Query	Range: 1\|0
*RST Setting	0 (off)
Requirements	Test Application Revision A.06 and above. Lab Application Revision C.01 and above.
Programming Example OUTPUT 714;"SETUP:FSTABILITY:CONTINUOUS ON" !Sets measurement to continuous trigger mode.

SETup:FSTability:COUNt[:SNUMber]

Function	Sets/queries the number of frequency stability measurements to be made in a multi-measurement setup. This command sets the count, and automatically sets the multi-measurement STATe command to 1 (on).
Setting	Range: 1 to 999
Query	Range: 1 to 999
*RST Setting	10, on
Requirements	Test Application Revision A.06 and above. Lab Application Revision C.01 and above.
Programming Example OUTPUT 714;"SETUP:FSTABILITY:COUNT:SNUMBER 5" !Turns on multi-measurements and sets the number of measurements to 5.

SETup:FSTability:COUNt:NUMBer

Function	Sets/queries the number of frequency stability measurements to be made when milt-measurement state is ON.
Setting	Range: 1 to 999
Query	Range: 1 to 999
*RST Setting	10
Requirements	Test Application Revision A.06 and above. Lab Application Revision C.01 and above.
Programming Example OUTPUT 714;"SETUP:FSTABILITY:COUNT:NUMBER 5" !Sets the number of measurements to 5 when the multi-measurement state is set to ON.

SETup:FSTability:COUNt:STATe

Function	Sets/queries the multi-measurement state of the frequency stability measurement.
Setting	Range: 1\|ON\|0\|OFF
Query	Range: 1\|0
*RST Setting	0 (off)
Requirements	Test Application Revision A.06 and above. Lab Application Revision C.01 and above.
Programming Example OUTPUT 714;"SETUP:FSTABILITY:COUNT:STATE ON" !Turns on multi-measurements.

SETup:FSTability:TIMeout[:STIMe]

Function	Sets/queries the frequency stability measurement's timeout setting and automatically sets the timeout state to ON.
Setting	Range: 0.1 to 999.9 seconds Resolution: 0.1 second
Query	Range: 0.1 to 999.9
*RST Setting	10 seconds, on
Requirements	Test Application Revision A.06 and above. Lab Application Revision C.01 and above.
Programming Example OUTPUT 714;"SETUP:FSTABILITY:TIMEOUT:STIME 5S" !Sets timeout state to ON and sets the timeout time to 5 seconds.

SETup:FSTability:TIMeout:STATe

Function	Sets/queries the frequency stability measurement's timeout state.
Setting	Range: 1\|ON\|0\|OFF
Query	Range: 1\|0
*RST Setting	0 (off)
Requirements	Test Application Revision A.06 and above. Lab Application Revision C.01 and above.
Programming Example OUTPUT 714;"SETUP:FSTABILITY:TIMEOUT:STATE ON"

SETup:FSTability:TIMeout:TIME

Function	Sets/queries the frequency stability measurement's timeout setting.
Setting	Range: 0.1 to 999.9 seconds Resolution: 0.1 second
Query	Range: 0.1 to 999.9 seconds Resolution: 0.1 second
*RST Setting	10 seconds, on
Requirements	Test Application Revision A.06 and above. Lab Application Revision C.01 and above.
Programming Example OUTPUT 714;"SETUP:FSTABILITY:TIMEOUT:TIME 5S"