Data Display Features
Keysight's PD1000A Software provides several useful features for the S-parameter data displays.
| Display Shortcuts | |
|---|---|
| Left-click | Left-click to displays specific data for the nearest data plot point. |
| Right-click + drag | Right-click and drag the data display to scroll the data left/right and up/down. |
| Mouse wheel | Roll the mouse wheel to zoom in or out. |
| Fit to Screen button | Click to reset the display. |
| S-Parameter/Cgd/Cds/Cgs button | (On-state S-parameter only) Toggles display between S-parameter (S-parameter power vs. frequency) and Capacitance vs. frequency displays. |
Click for more information:
Change Size of Data Area
To resize the data area:
-
Mouse-over the area between the data display and the test settings. This highlights a slider bar between the two areas and displays an arrow.
-
Right-click and drag the arrow to resize the data area.
Zoom In or Out
-
Roll the mouse wheel to zoom in or out on the data plot.
-
To reset the display, click Fit to Screen:
Scroll Data
-
Right-click on the display, then hold and drag to scroll the data left/right or up/down.
-
To reset the display, click Fit to Screen
Display Specific Data Points
During or after a test, mouse-over any place on the graphic plot and then click. A yellow data box appears at the nearest data trace and shows the test measurement data at that specific point:
Choose S-Parameter or Capacitance Display
Click the S-Parameter, Cgd, Cds, or Cgs button to toggle the on-state S-parameter display between S-parameter (S-parameter power vs. frequency) and Cgd (Crss), Cds, or Cgs.
Reset the Display
To reset the display, click the Fit to Screen button. This re-centers and re-sizes the display to its original settings.