NB-IoT Demod Properties Dialog Box
Menu Path:
The dialog box contains parameters that let you configure the VSA to demodulate NB-IoT signals.
The NB-IoT demodulator must be selected before this dialog box is available. To enable the demodulator, click
The dialog box contains tab headings that group similar configuration parameters as follows:
-
Format Tab: Lets you access basic demod configuration parameters such as sync type, Cell ID, downlink/uplink format parameters and in-band E-UTRA UMTS Terrestrial Radio Access: A W-CDMA standard developed ETSI, ARIB and the TIA. This system uses DSSS and either FDD or TDD depending on its frequency assignment and application. parameters.
-
Profile Tab: Lets you choose which channels are shown on traces and used in calculations, such as EVM Error vector magnitude (EVM): A quality metric in digital communication systems. See the EVM metric in the Error Summary Table topic in each demodulator for more information on how EVM is calculated for that modulation format. or Power, as well as specify user channel allocations and control channel parameters.
-
Time Tab: Lets you specify what part of the signal to analyze.
-
Advanced Tab: Lets you specify signal adjustment and correction parameters.
- Decode Tab: Lets you set decoding parameters.
See Also
