Analyzed Symbols (Pre-5G)
indicates the subframe and symbols being measured relative to the analysis start boundary, which is determined by the Signal Radio Frame Offset and Analysis Region Meas Offset (Subframes and Symbols).
You can look up the subframe being analyzed in the Assigned Subframes column of the Subframe Mappings editor on the Format tab of the Pre-5G Demod Properties dialog. For example, if Signal Radio Frame Offset = 3, and Analysis Region Meas Offset Subframes=2, the analysis subframe results should report an Assigned Subframe equal to 5, which in the frame definition would be a Downlink2 subframe configuration, as shown below:
The subframe value displayed in the Analyzed Symbols data field includes the Signal Radio Frame Offset and Analysis Region Subframe Offset values. Other traces like All Subframes or Error Vector Time may show "0 Subframes" on the X-Axis, but it is based on the Meas Offset value. Even though the axis shows Subframe 0, it is displaying the correct subframe in the Analyzed Symbols data field.
See Also
