Selecting 1xEV-DO Demodulator

(option B7W only)

Sets the VSA's demodulator to despread and demodulate 1xEV-DO modulated signals. Both forward link and reverse link signals can be demodulated.

After selecting the demodulator you need to set the configuration parameters. You can select one of the available Standard Presets or you can manually set them from the Demod Properties dialog box.

It is also recommended that you review Setting up a 1xEV-DO Measurement before setting these parameters.

Example recordings

The 89600 VSA includes several example 1xEV-DO signals that can be used to help you learn how to use the 1xEV-DO demodulator. The included signals are listed in the Demo and Recorded Signals topic in the Getting Started book.