Read-only

About Cal Sets

Description

Note: This command is replaced by CalSet.getStandardList2.

Returns the list of Standards contained in this Cal Set for the CalType specified in the OpenCal Set method. Learn more about reading and writing Cal Data using COM.

The list is a comma separated, textual representation of the error terms with the term name followed by the port path in parentheses.

Standard (n, n),

Standard (m, n)  

Before calling this method you must open the Cal Set with OpenCal Set. If the Cal Set is not open, this method returns E_NA_Cal Set_ACCESS_DENIED. 

Use StringToNACalClass  to convert the list entrees to values that can be used with GetStandard and PutStandard.

Note:  The port path designation (m n) indicates the receive and source ports for the measurement.  Shorts, opens and loads are single port devices, designated in this list by (n n) where n equals the port to which the device is connected. These devices are all characterized by reflection measurements.
The dual port thru device is characterized by both transmission and reflection measurements in order to compensate for load match and tracking terms. 
The notation (n n) indicates the reflection measurement for this device. 
The notation (m n) indicates the transmission measurement, where the source and receive ports are different.

VB Syntax

CalSet.GetStandardsList (count, list)

Variable

(Type) - Description

CalSet

(object) -  A Cal Set object

count

(long [out]) - indicates the number of items returned in the list

list

(string) - Variable to store the returned Comma separated list of items.

Return Type

String

Default

Not Applicable

Examples

dim count as Integer
dim list as string
OpenCalSet (naCalType_TwoPortSOLT, 1, 2)
GetStandardsList( count, list)
CloseCalSet( )

Assuming the Cal Set contained the full set of standards for this two port cal, the returned list would be:

"Open(1 1),

Short(1 1),

Load(1 1),

Thru(1 1),

Isolation(2 1),

Open(2 2),

Short(2 2),

Load(2 2),

Thru(2 2),

Isolation(1 2)

Thru(2 1),

Thru(1 2)"

C++ Syntax

HRESULT GetStandardsList( long* count, BSTR* list);

Interface

ICalSet