Read-only |
About the Handler IO Connector |
Description |
Reads a hardware latch that captures high to low transitions on Input1 of the Material Handler IO. Reading the latch causes it to reset and is ready for the next transition. The hardware latch is only capable of capturing one transition per query. Additional transitions are ignored until after the next query. Momentarily driving Input1 high, then low, causes a transition to be detected and latched. |
VB Syntax |
inp1 = handlerIo.get_Input1 |
Variable |
(Type) - Description |
|
inp1 |
(variant) - A variable to store the return value |
|
handlerIo |
(object) - A HandlerIO object |
Return Type |
Variant - 0 - a high to low transition occurred at Input1 since the last time it was queried. 1 - no high to low transition occurred. |
Default |
Not Applicable |
Examples |
input1 = handlerIo.get_Input1 'Read |
C++ Syntax |
HRESULT get_Input1 (VARIANT* Data ); |
Interface |
IHWMaterialHandlerIO |