:CORR1:COLL:RF

Syntax

[:SENSe]:CORRection1:COLLect[:ACQuire]:RF {STAN|STAN2|STAN3|STAN4}

Description

Obtains the data for calculating the calibration coefficients to use during impedance measurement performed with the specified standard. The data is obtained for only the active table. (No query)

The measurement to obtain the data is not started by execution of this command. You must trigger the instrument after execution of this command when the trigger source is not set to internal trigger (Int).
The following command sequence is recommended to ensure the calibration data acquisition.

:INIT:CONT OFF
'
'
:CORR1:COLL:RF STAN1
:INIT
*OPC?

Variable

Parameter

Param

Range

Select from the following:

STAN1: OPEN standard

STAN2: SHORT standard

STAN3:LOAD standard

STAN4: Low-loss capacitor

Related objects

:CORR1:COLL

:CORR1:COLL:DC

Equivalent key

Cal > OPEN|SHORT|LOAD > AC