Sweep Commands - Modulation Distortion Measurement Class

Click here to view links to Sweep commands for all Measurement Classes.

Main Tab Commands
Softkey	Sub-item	SCPI	COM
Number of Points		SENSe:SWEep:POINts	NumberOfPoints
Sweep Type	Fixed	SENSe:SWEep:TYPE	SweepType
Sweep Type	Power	SENSe:SWEep:TYPE	SweepType
Start		SENSe:FREQuency:STARt	StartFrequency
Stop		SENSe:FREQuency:STOP	StopFrequency
X-axis Type...	Select	DISPlay:WINDow:TRACe[:STATe]	View
	Sweep Type	SENSe:DISTortion:SWEep:TYPE	None
	X-axis Type	CALCulate:MEASure:DATA:X:AXIS	None
	Fixed Parameters (Power Sweep only) Parameter Value	CALCulate:MEASure:DATA:X:AXIS:FIXed:PARameter CALCulate:MEASure:DATA:X:AXIS:FIXed:PARameter:VALue	None None
MOD Setup...
Sweep Timing Tab Commands
Softkey	Sub-item	SCPI	COM
Sweep Delay		SENSe:SWEep:DWELl:SDELay	SweepDelay
Dist Meas Delay		SENSe:DISTortion:SWEep:DWELl	None
Re-use S-Param		SENSe:DISTortion:SWEep:SPARam:REUSe	None
Source Control Tab Commands
Softkey	Sub-item	SCPI	COM
Source Modulation...
Pulse Setup...	Pulse Measurement
	Off	SENSe:SWEep:PULSe:MODE	PulseMeasMode
	Standard Pulse	SENSe:SWEep:PULSe:MODE	PulseMeasMode
	Pulse Timing
	RF Pulse Width	SENSe:SWEep:PULSe:PRIMary:WIDth	PrimaryWidth
	Pulse Period	SENSe:SWEep:PULSe:PRIMaryPERiod	PrimaryPeriod
	Measurement Timing
	Device	SENSe:PULSe:MTIMing:DEVice	PulseTimingDevice
	Width	SENSe:SWEep:PULSe:PRIMary:WIDth	PrimaryWidth
	Delay	None	None
	Invert	SENSe:PULSe:INVert	Invert
	Enable	SENSe:PULSe[:STATe]	State
	Autoselect Receiver Timing	SENse:DISTortion:PULSe:RECeiver:AUTO	None
	Offset Pulses using ADC Delay	SENSe:PULSe:HWDelay[:STATe]	EnableOffsetDelays
	Plot Pulse Timing...	None	None
	Pulse Generators...
	Width	SENSe:PULSe:WIDTh	Width
	Delay	SENSe:PULSe:DELay	Delay
	Invert	SENSe:PULSe:INVert	Invert
	Enable	SENSe:PULSe[:STATe]	State
	Trigger	SENSe:PATH:CONFig:ELEMent[:STATe]	Element
	Frequency	SENSe:SWEep:PULSe:PRIMary:FREQuency	PrimaryFrequency
	Period	SENSe:SWEep:PULSe:PRIMary:PERiod	PrimaryPeriod
	Enable Source x Modulator	SENSe:PATH:CONFig:ELEMent[:STATe]	Element
	ALC Open Loop	SOURce:POWer:ALC[:MODE]	ALCLevelingMode
	Modulator Drive	SENSe:PATH:CONFig:ELEMent[:STATe]	Element
	Offset Pulse using ADC Delay and RF Modulator Delay	SENSe:PULSe:HWDelay[:STATe]	EnableOffsetDelays
	Modulator Delay	SENSe:PULSe:HWDelay:MODulator	ModulatorDelay
	Synchronize ADCs using Pulse Trigger	SENSe:PATH:CONFig:ELEMent[:STATe]	Element
	Pulse4 Output Indicates ADC Activity	SENSe:PULSe4:OPTion	Pulse4OutAsADCActivity
	Pulse Trigger...
	Trigger Source	SENSe:PATH:CONFig:ELEMent[:STATe]	Element
	Trigger Level/Edge	SENSe:PULSe:TTYPe	TriggerInType
	Synchronize ADCs using pulse trigger	SENSe:PULSe[:STATe]	State
	Trigger...
DC Source...	On/Off	SOURce:DC:STATe	State