Sweep Commands - Phase Noise Measurement Class

Click here to view links to Sweep commands for all Measurement Classes.

Main Tab Commands
Softkey	Sub-item	SCPI
Number of Points		SENSe:SWEep:POINts
Start		SENSe:FREQuency:STARt
Stop		SENSe:FREQuency:STOP
Phase Noise Setup...
Sweep Timing Tab Commands
Softkey	Sub-item	SCPI
Sweep Time	Auto	SENSe:SWEep:TIME:AUTO
Sweep Time	Manual	SENSe:SWEep:TIME[:STOP]
Dwell Time		SENSe:SWEep:DWELl
Sweep Delay		SENSe:SWEep:DWELl:SDELay
Sweep Mode	AUTO	SENSe:SWEep:GENeration
Sweep Mode	STEPPED	SENSe:SWEep:GENeration
Sweep Sequence	STD	SENSe:SWEep:GENeration:POINtsweep
Sweep Sequence	POINT	SENSe:SWEep:GENeration:POINtsweep
Fast Sweep	ON	SENSe:SWEep:SPEed
Fast Sweep	OFF	SENSe:SWEep:SPEed
Source Control Tab Commands
Softkey	Sub-item	SCPI
Pulse Setup...	Pulse Measurement
	Off	SENSe:SWEep:PULSe:MODE
	Standard Pulse	SENSe:SWEep:PULSe:MODE
	Pulse Profile	SENSe:SWEep:PULSe:MODE
	Pulse Timing
	Pulse Width	SENSe:SWEep:PULSe:PRIMary:WIDth
	Pulse Period	SENSe:SWEep:PULSe:PRIMary:PERiod
	Pulse Frequency	SENSe:SWEep:PULSe:PRIMary:FREQuency
	Properties
	Autoselect Pulse Detection Method	SENSe:SWEep:PULSe:DETectmode[:AUTO]
	Narrowband	SENSe:SWEep:PULSe:WIDeband[:STATe]
	Wideband	SENSe:SWEep:PULSe:WIDeband[:STATe]
	SW Gating	SENSe:SWEep:PULSe:SWGate
	Autoselect IF Path Gain and Loss	SENSe:SWEep:PULSe:IFGain[:AUTO]
	IF Path...	SENSe:PATH:CONFig:ELEMent[:STATe]
	Optimize Pulse Frequency	SENSe:SWEep:PULSe:PRF[:AUTO]
	Autoselect Profile Sweep Time	SENSe:SWEep:PULSe:MODE
	IFBW	SENSe:SWEep:PULSe:CWTime[:AUTO]
	Sweep Time	SENSe:SWEep:TIME
	Number of Points	SENSe:SWEep:POINts
	Measurement Timing
	Width	SENSe:SWEep:PULSe:TIMing
	Delay	SENSe:SWEep:PULSe:TIMing
	Pulse Gen	SENSe:SWEep:PULSe:MODE
	Master Pulse Trigger	SENSe:PATH:CONFig:ELEMent[:STATe]
	Autoselect Width & Delay	SENSe:SWEep:PULSe:TIMing
	Autoselect Pulse Generators	SENSe:SWEep:PULSe:DRIVe[:AUTO]
	Pulse Generators...
	Width	SENSe:PULSe:WIDTh
	Delay	SENSe:PULSe:DELay
	Invert	SENSe:PULSe:INVert
	Enable	SENSe:PULSe[:STATe]
	Trigger	SENSe:PATH:CONFig:ELEMent[:STATe]
	Frequency	SENSe:SWEep:PULSe:PRIMary:FREQuency
	Period	SENSe:SWEep:PULSe:PRIMary:PERiod
	Enable Source x Modulator	SENSe:PATH:CONFig:ELEMent[:STATe]
	Modulator Drive	SENSe:PATH:CONFig:ELEMent[:STATe]
	Offset Pulse using Modulator and ADC Delays	SENSe:PULSe:HWDelay[:STATe]
	Modulator Delay	SENSe:PULSe:HWDelay:MODulator
	Fixed ADC Delay	SENSe:PULSe:HWDelay:ADC?
	Synchronize ADCs using pulse trigger	SENSe:PATH:CONFig:ELEMent[:STATe]
	Pulse4 Output Indicates	SENSe:PULSe4:OPTion
	All ADC Activity	SENSe:PULSe4:OPTion:MODE ALL
	Trace ADC Activity	SENSe:PULSe4:OPTion:MODE TRACe
	Pulse Trigger...
	Trigger Source	SENSe:PATH:CONFig:ELEMent[:STATe]
	Trigger Level/Edge	SENSe:PULSe:TTYPe
	Synchronize ADCs using pulse trigger	SENSe:PULSe[:STATe]
	Trigger...
DC Source...	Enable DC Outputs	SOURce:DC:ENABle
	State	SOURce:DC:STATe
	Start DC	SOURce:DC:STARt
	Stop DC	SOURce:DC:STOP
	Limits...
	State	SOURce:DC:STATe
	Min	SOURce:DC:LIMIt:MINimum
	Max	SOURce:DC:LIMIt:MAXimum