| Main Tab Commands | |||
| Softkey | Sub-item | SCPI |
|
| Show Taskbar | None |
|
|
| Move App to Back | None |
|
|
| Minimize Application | None |
|
|
| Exit | None |
|
|
| Security... | SYSTem:SECurity[:LEVel] |
|
|
| Control Panel... | None |
|
|
| Manage Files... | List Files | MMEMory:CATalog |
|
| Copy Files | MMEMory:COPY |
|
|
| Move Files | MMEMory:MOVE |
|
|
| Delete Files | MMEMory:DELete |
|
|
| System Setup Tab Commands | |||
| Softkey | Sub-item | SCPI |
|
| Next/Prev Keys | Trace | None |
|
| Channel | None |
|
|
| Window | None |
|
|
| Sheet | None |
|
|
| Preferences... | Avg: On Preset set two-point Group Delay Aperture | SYSTem:PREFerences:ITEM:GDELay:TWOPoint |
|
Avg: Calculate Group Delay using legacy PNA Math |
LegacyGroupDelayApertureMath |
||
| Cal: Always merge when saving Cal in Cal Set | None |
|
|
| Cal: Always use Internal trigger during cal | None |
|
|
| Cal: ECal Extrapolation for IMD | None |
|
|
| Cal: For Frequency Offset, use Primary frequencies | SENSe:CORRection:PREFerences:CALibration[:FOM]:RANGe |
|
|
| Cal: (SCPI only) Auto-generate a User Cal Set | SENSe:CORRection:CSET:CREate |
|
|
| Cal: (SCPI only) Auto-save to current Cal Set | SENSe:CORRection:PREFerence:CSET:SAVE |
|
|
Cal: Use legacy behavior for Series-C & Shunt-L fixtures |
|
||
| Cal: Use Unknown thru math for SOLT methods | SYSTem:PREFerence:ITEM:USOLt |
|
|
| Display: Selected trace changes width briefly | None |
|
|
| Display: Selected trace is wider | None |
|
|
| Display: Touchscreen On | SYSTem:TOUChscreen[:STATe] |
|
|
| Ext Device: De-activate on Preset and Recall | SYSTem:PREFerences:ITEM:EDEV:DPOLicy |
|
|
| Ext Reference: Modify Settings on Preset and Recall | SYSTem:PREFerences:ITEM:ROSCillator:RECall |
|
|
| Limit: Draw failed trace segments in red | SYSTem:PREFerences:ITEM:RTOF |
|
|
| Limit: Draw limit lines in red | SYSTem:PREFerences:ITEM:REDLimits |
|
|
| Limit: Test the nearest measurement point | None |
|
|
| Marker: Coupling controls on/off state of markers | SYSTem:PREFerences:ITEM:MCControl |
|
|
| Marker: On Preset, Coupled Markers is On | SYSTem:PREFerences:ITEM:MCPreset |
|
|
| Marker: On Preset, Coupling Method is Channel | SYSTem:PREFerences:ITEM:MCMethod |
|
|
| Marker: On Preset, set BW/Notch search reference to Peak | SYSTem:PREFerences:ITEM:MARKer:BANDwidth:SEARch |
|
|
| Marker: Programming treats Mkr 10 as Reference | SYSTem:PREFerences:ITEM:REFMarker |
|
|
| Marker: Use single marker for marker search | SYSTem:PREFerences:ITEM:MARKer:SINGle |
|
|
| Meas: Mathematical offset for receiver attenuation | SYSTem:PREFerences:ITEM:OFFSet:RCV |
|
|
| Meas: Mathematical offset for source attenuation | SYSTem:PREFerences:ITEM:OFFSet:SRC |
|
|
| Memory: Data Math 8510 Mode | None |
|
|
| Memory: Interpolate ON is default condition | SYSTem:PREFerences:ITEM:MINTerpolate |
|
|
| Power: On Preset turn power off | SYSTem:PREFerences:ITEM:PRESet:POWer |
|
|
| Power: On Preset turn power on | SYSTem:PREFerences:ITEM:PRESet:POWer |
|
|
| Power: Report source unleveled events as errors | SYSTem:ERRor:REPort:SUNLeveled |
|
|
| Power: Report when receiver is overloaded | SYSTem:PREFerences:ITEM:RECeivers:CERRor |
|
|
| Power: Force RF power Off at the end of sweep | SYSTem:PREFerences:ITEM:RETRace:POWer |
|
|
| Power: Turn Source Power Off when receiver is overloaded | SYSTem:PREFerences:ITEM:RECeivers:OVERload:POWer |
|
|
| Power: Use Start Power during Power Sweep retrace | SYSTem:PREFerences:ITEM:PSRTrace |
|
|
| Preset: Confirm preset | SYSTem:PREFerences:ITEM:PRESet:CONFirm |
|
|
| Preset: On Preset show Quick Start dialog | SYSTem:PREFerences:ITEM:QSTart |
|
|
| Recall: Softkey order is most recently used | None |
|
|
| Scale: On Preset Couple Scale to Window | None |
|
|
| Sweep: On Preset set Sweep Mode to Stepped | None |
|
|
| Sweep: Use only ramp sweeps for Auto Sweep Mode | SYSTem:PREFerences:ITEM:ASMRamp |
|
|
| System: Enable sound | SYSTem:BEEP:STATe |
|
|
| System: On Power-on show dialog if detect mm testset | None |
|
|
| System: On Power-on show Keys toolbar | SYSTem:PREFerences:ITEM:Keys |
|
|
| System: Use keyboard to navigate softkeys | SYSTem:PREFerences:ITEM:SOFTkeys:NAVigation |
|
|
| System: Set front panel remote state when a SCPI command is received | SYSTem:PREFerences:ITEM:REMote:AUTO[:STATe] |
|
|
| Trigger: External Trigger Out is Global | TRIGger:PREFerences:AIGLobal |
|
|
| Data Saves... | MMEMory:STORe:DATA |
|
|
| Power Limit... | SYSTem:POWer:LIMit |
|
|
| Transparency... | None |
|
|
| User Preset... | SYSTem:UPReset |
|
|
| Page Setup... | Hardcopy |
|
|
| Disp Colors... | See Display |
|
|
| Print Colors... | See Display |
|
|
Power On (All Channels) |
None |
|
|
Global Sources Ignore "Power ON" Setting |
|
||
Global |
|
||
State |
|
||
Frequency |
|
||
Power |
|
||
| Sound |
|
||
| Remote Interface... | GPIB Address | None |
|
| SICL Enabled | None |
|
|
| SICL Address | None |
|
|
| Automatically Enable on Startup | None |
|
|
| Sockets Enabled | None |
|
|
| Telnet Enabled | None |
|
|
| HiSLIP Enabled | None |
|
|
| HiSLIP Address | None |
|
|
| Enable Remote Drive Access | SYSTem:COMMunicate:DRIVe:ENABle? |
|
|
| Show SCPI Parser Console | None |
|
|
| Monitor GPIB Bus | None |
|
|
SCPI Recorder |
|
None |
|
| Print Tab Commands | |||
| Softkey | Sub-item | SCPI |
|
| Print... | HCOPy:DPRinter |
|
|
| Print to File... | HCOPy:FILE |
|
|
| Page Setup... | Hardcopy |
|
|
| Print Colors... | Pen | ||
| Background | DISPlay:COLor:BACKground |
|
|
| Active Background | DISPlay:COLor:ABACkground |
|
|
| Grid | DISPlay:COLor:GRAT2 |
|
|
| Active Labels, Grid frame | DISPlay:COLor:GRAT1 |
|
|
| Inactive Window Labels | DISPlay:COLor:ILABel |
|
|
| Failed Trace | DISPlay:COLor:LIM1 |
|
|
| N Trace: Data and Limits | DISPlay:COLor:TRACe:DATA |
|
|
| N Trace: Memory | DISPlay:COLor:TRACe:MEMory |
|
|
| N Trace: Markers | DISPlay:COLor:TRACe:MARKer |
|
|
| N Trace: Memory Markers | DISPlay:COLor:TRACe:MMARker |
|
|
| Change Color... | None |
|
|
| Reset Color | DISPlay:COLor:RESet |
|
|
| Color Theme | |||
| Save Theme... | DISPlay:COLor:STORe |
|
|
| Recall Theme... | DISPlay:COLor:LOAD |
|
|
| Reset Theme | DISPlay:COLor:RESet |
|
|
| Help Tab Commands | |||
| Softkey | Sub-item | SCPI |
|
| NA Help... | None |
|
|
| On The Web... | None |
|
|
| Error Display... | Enable Messages | DISPlay:ANNotation:MESSage:STATe |
|
| Status bar Display | DISPlay:ANNotation[:STATus] |
|
|
| Confirmation Dialog boxes | None |
|
|
| View Error Log... | None |
|
|
| Tech Support |
PathWave Calibration Advisor Commands |
SYSTem:CAPability:LICenses:FEATure:CATalog? SYSTem:CAPability:LICenses:FEATure:ENABle?
SYSTem:SERVice:MANagement:CALibration:INFormation? SYSTem:SERVice:MANagement:CALibration:INTerval:DEFault SYSTem:SERVice:MANagement:CALibration:INTerval:TYPE? SYSTem:SERVice:MANagement:CALibration:INTerval[:VALue] SYSTem:SERVice:MANagement:CALibration:NOTification:ENABle SYSTem:SERVice:MANagement:CALibration:PASScode:CHANge SYSTem:SERVice:MANagement:CALibration:PASScode[:VALue] |
|
| About NA... | None |
|
|
| Service Tab Commands | |||
| Softkey | Sub-item | SCPI |
|
Update Firmware |
|
None |
|
Verification |
None |
|
|
| Adjustment Routines... | None |
|
|
Diagnostics |
None |
|
|
Option Enable |
None |
|
|