Click here to view links to Cal commands for all Measurement Classes.
| Main Tab Commands | ||
| Softkey | Sub-item | SCPI |
|
|
||
|
Other Cals |
Cal All... |
|
| Source Power Cal... |
|
|
| Src Power Correct | ON/OFF | SOURce:POWer:CORRection[:STATe] |
| Interpolation | ON/OFF | SENSe:CORRection:INTerpolate[:STATe] |
| Correction Methods... | CALCulate:MEASure:CORRection:TYPE | |
| Properties... | None | |
| Port Extension Tab Commands | ||
| Softkey | Sub-item | SCPI |
| Select | Port N | SENSe:CORRection:EXTension:PORT |
| Port Extension | ON/OFF | SENSe:CORRection:EXTension |
| Time | SENSe:CORRection:EXTension:PORT:TIME | |
| Distance | SENSe:CORRection:EXTension:PORT:DISTance | |
| Velocity Factor | SENSe:CORRection:RVELocity:COAX | |
| DC Loss | SENSe:CORRection:EXTension:PORT:LDC | |
| Cal Sets & Cal Kits Tab Commands | ||
| Softkey | Sub-item | SCPI |
| Cal Set Viewer | ON/OFF | DISPlay:TOOL:CSET[:STATe] |
|
|
||
|
|
||
| Cal Pod... | ||
| Fixtures Tab Commands | ||
| Softkey | Sub-item | SCPI |
| Apply Fixtures | ON/OFF | CALCulate:FSIMulator:STATe |
| Power Comp... | Port N | |
|
Change order of operations |
||
|
2 and 4-port Extrapolate |
||
| 2-Port Fixturing | ||
|
Port matching ON and OFF |
||
|
Reverse ports |
||
|
Sets Port Matching circuit model |
||
|
Sets Port Matching 'S2P' file name |
||
|
Sets Capacitance 'C' value |
||
|
Sets Conductance 'G' value |
||
|
Sets Inductance 'L' value |
||
|
Sets Resistance 'R' value |
||
|
De-embed ON and OFF |
||
|
Sets De-embedding circuit model |
||
|
Sets De-embedding 'S2P' file name |
||
|
Port Impedance ON and OFF |
||
|
Port Z Real |
||
|
Port Z Imag |
||
|
Port Z Real and Imag |
||
| Remote ONLY | ||
|
Create Cal Set with De-embeded fixture removed |
||
|
Create Cal Set with Matching network included |
||