System:..Main | System Settings | Print | Help | Services
|
SoftTab & Softkey |
Command in DialogBox |
SCPI |
||
|---|---|---|---|---|
|
Show Taskbar |
|
|
None |
|
|
Move App to Back |
|
None |
|
|
|
Minimize Application |
|
None |
|
|
|
Exit |
None |
|
||
|
Security... |
Security Level |
None |
|
|
|
Control Panel... |
|
None |
|
|
|
Manage Files... |
|
None |
|
|
|
Next/Prev Keys |
|
Trace Channel Window |
None None None |
|
Preferences |
Avg: On Preset set two-point Group Delay Aperture Cal: Auto-save to User Cal Set Cal: Auto-save to current Cal Set Cal: For Frequency Offset, use Primary frequencies Cal: Use External Trigger, if selected, during cal Display: Selected trace changes width briefly Display: Selected trace is wider Display: Touchscreen On Ext Device: De-activate on Preset and Recall Limit: Test the nearest measurement point Marker: Coupling controls on|off state of markers Marker: On Preset, Coupling Method is Channel Marker: On Preset, Coupling Method is On Marker: Programming treats Mkr 10 as Reference Marker: Use single marker for marker search Meas: Draw failed trace segments in red Meas: Draw limit lines in red Memory: Data Math 8510 Mode Power: On Preset turn power on Power: Report source unleveled events as errors Preset: Confirm preset Preset: On Preset show Quick Start dialog Recall: Softkey order is most recently used Scale: On Preset Couple Scale to Window Sweep: On Preset set Sweep Mode to Stepped Sweep: Use only ramp sweeps for Auto Sweep Mode [TODO: Remove before SRR] Show Menu bar System: Enable sound System: Use keyboard to navigate softkeys Data Saves... Power Limit... Transparency... User Preset... Page Setup... Disp Colors... Print Colors... |
None SENSe:CORRection:PREFerence:CSET:SAVE None SENSe:CORRection:PREFerence:CALibration:RANGe SYSTem:CONFigure:EDEVice:SOURce:TMODe None None SYSTem:PREFerence:ITEM:EDEV:DPOLicy None None None None None None None None SYSTem:PREFerence:ITEM:PRESet:POWer None None None None None None None None None None None None |
|
|
Sound |
ON | OFF |
||
|
SICL/GPIB. |
GPIB Address SICL Enabled SICL Address Automatically Enable on Startup Sockets Enabled Telnet Enabled HiSlip Enabled HiSlip Address Show SCPI Parser Console Monitor GPIB Bus |
None None None None None None None None None None |
|
|
Lan Status... |
LAN Reset |
None |
|
|
Code Emulation |
|
None |
|
|
Print... |
|
None |
|
|
Print to File... |
|
None |
|
|
Page Setup... |
|
None |
|
|
|
Pen Background Active Background Grid Active Labels, Grid frame Inactive Window Labels Failed Trace N Trace: Data and Limits N Trace: Memory N Trace: Markers N Trace: Memory Markers Change Color... Reset Color Color Theme Save Theme... Recall Theme... Reset Theme... |
DISPlay:COLor:IBACKground | IBACkground None None None None |
|
|
NA Help... |
|
|
None |
|
On the Web... |
None |
||
|
Error Display... |
Enable Messages Status bar Display Confirmation Dialog boxes |
DISPlay:ANNotation:MESSage:STATe? None None |
|
|
View Error Log... |
None |
||
|
About NA... |
None |
||
|
Operator's Check |
None |
||
|
System Verification |
None |
||
| Display Test |
None |
||
| Front Panel Test |
None |
||
| Restore Ecal Memory |
None |
||
Last Modified:
|
4-Nov-2014 |
Initial Release |