Advanced Carrier Setup (Framed Signal):1 2 3
|
3. Burst Shape |
|---|
Range: 1/oversampling rate to 50 symbols
Default: 3.0000
Resolution: 1/oversampling rate. For example, if the oversampling rate is 4, the resolution is 1/4 (= 0.250).
Set the rise time of the burst.
Range: –10 to 50 symbols
Default: 0.0000
Resolution: 1/oversampling rate. For example, if the oversampling rate is 4, the resolution is 1/4 (= 0.250).
Set the rise delay of the burst.
Range: 1/oversampling rate to 50 symbols
Default: 3.0000
Resolution: 1/oversampling rate. For example, if the oversampling rate is 4, the resolution is 1/4 (= 0.250).
Set the fall time of the burst.
Range: –10 to 50 symbols
Default: 0.0000
Resolution: 1/oversampling rate. For example, if the oversampling rate is 4, the resolution is 1/4 (= 0.250).
Set the fall delay of the burst.
Choice: Sine | User Defined Shape
Default: Sine
Click the Details button
in this cell to open the Burst Shape Selection
dialog window.
Select or .
Select to create a custom burst shape. See the 
drop-down figure.
1. GSM/EDGE/EGPRS2/Control Channels (Framed Signal - Advanced)
to navigate to an existing file of burst
shape data.
to save the burst shape data defined in the
Burst Shape Selection window to a file.
to delete entered data from the Burst Shape
Selection window.
to insert a sample row in the Rise Shape
or Fall Shape table and enter a value for the sample to modify the burst
shape.
to apply the value entered for the sample.
to delete the selected row from the Rise
Shape or Fall Shape table.
in the Rise Shape pane to make the fall shape
a mirror image of the rise shape.
to apply your changes to the displayed graph
of the burst shape. See the example below.