When an M9383B/M9384B/M9484C is connected, you will see the display as below:
Displays the model number of the currently connected instrument.
The model number of the connected instrument appears here after you run the System Configuration Wizard.
Choices: On | Off
Default: On
Enables or disables DC calibration. If enabled, the DC calibration will be performed after ARB is turned on.
On − The signal generator performs a DC I/Q calibration after downloading a waveform.
Off − The signal generator does not perform DC I/Q calibrations.
(M9383B/M9384B/M9484C only)
Choice: depends on the connected instrument
Default: 1
Sets the channel number for M9383B VXG-m, M9384B VXG, and M9484C VXG signal generators.