CALL[:CELL]:CHSDschannel

Function

The setting form of this command performs two functions: (1) sets the CALL[:CELL]:CHSDschannel:AICHannel:LEVel and (2) sets the CALL[:CELL]:CHSDschannel:AICHannel:STATe to on.

See Common HS-DSCH AICH Level.

The query form of this command returns the CALL[:CELL]:CHSDschannel:AICHannel:LEVel.

Setting

Range: -20.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:AICHannel[:SLEVel] -10" 

Function

Sets/queries the Common HS-DSCH AICH Power Offset.

Setting

Range: -20.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:AICHannel:LEVel -10" 

Function

Sets/queries the Common HS-DSCH AICH State.

Setting

Range: 1|ON|0|OFF

Query

Range: Range: 1|0

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:AICHannel:STATe on" 

Function

The setting form of this command performs two functions: (1) sets the CALL[:CELL]:CHSDschannel:CCPChannel:PRIMary:LEVel and (2) sets the CALL[:CELL]:CHSDschannel:CCPChannel:PRIMary:STATe to on.

See Common HS-DSCH PCCPCH/SCH Level.

The query form of this command returns the CALL[:CELL]:CHSDschannel:CCPChannel:PRIMary:LEVel.

Setting

Range: -20.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:CCPChannel:PRIMary[:SLEVel]-12" 

Function

Sets/queries the Common HS-DSCH PCCPCH/SCH Power Offset.

Setting

Range: -20.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:CCPChannel:PRIMary:LEVel -12" 

Function

Sets/queries the Common HS-DSCH PCCPCH/SCH State.

Setting

Range: 1|ON|0|OFF

Query

Range: 1|ON|0|OFF

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:CCPChannel:PRIMary:STATe on" 

Function

The setting form of this command performs two functions: (1) sets the CALL[:CELL]:CHSDschannel:CCPChannel:SECondary:LEVel and (2) sets the CALL[:CELL]:CHSDschannel:CCPChannel:SECondary:STATe to on.

See Common HS-DSCH SCCPCH Level.

The query form of this command returns the CALL[:CELL]:CHSDschannel:CCPChannel:SECondary:LEVel.

Setting

Range: -20.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:CCPChannel:SECondary[:SLEVel]-10.3" 

Function

Sets/queries the Common HS-DSCH SCCPCH Power Offset.

Setting

Range: -20.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:CCPChannel:SECondary:LEVel -10.3" 

Function

Sets/queries the Common HS-DSCH SCCPCH State.

Setting

Range:  1|ON|0|OFF

Query

Range:  1|ON|0|OFF

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:CCPChannel:SECondary:STATe on" 

Function

The setting form of this command performs two functions: (1) sets the CALL[:CELL]:CHSDschannel:CPIChannel:LEVel and (2) sets the CALL[:CELL]:CHSDschannel:CPIChannel:STATe to on.

See Common HS-DSCH PCPICH Level.

The query form of this command returns the CALL[:CELL]:CHSDschannel:CPIChannel:LEVel.

Setting

Range: -20.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:CPIChannel[:SLEVel] -10" 

Function

Sets/queries the Common HS-DSCH PCPICH Power Offset.

Setting

Range: -20.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:CPIChannel:LEVel -10" 

Function

Sets/queries the Common HS-DSCH PCPICH State.

Setting

Range: 1|ON|0|OFF

Query

Range: 1|ON|0|OFF

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:CPIChannel:STATe on" 

Function

Sets/queries the DRX Burst FACH.

This setting can only be changed when Call/Data Status is Idle .

Setting

Range:  1, 2, 4, 8

Unit: frames

Query

same with the setting

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:DRX:BURSt 1" 

Function

Sets/queries the DRX Cycle FACH.

This setting can only be changed when Call/Data Status is Idle .

Setting

Range: 4, 8, 16, 32

Unit: frames

Query

same with the setting

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:DRX:CYCLe 8" 

Function

Sets/queries the Interruption by HS-DSCH Data.

This setting can only be changed when Call/Data Status is Idle .

Setting

Range:  True | False

Query

Range:  True | False

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:DRX:INTerruption True" 

Function

Sets/queries the HS-DSCH DRX State.

This setting can only be changed when Call/Data Status is Idle .

Setting

Range: 1|ON|0|OFF

Query

Range: 1|ON|0|OFF

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:DRX:STATe 1" !
Sets the HS-DSCH DRX state to ON.	
		

Function

Sets/queries the T321.

This setting can only be changed when Call/Data Status is Idle .

Setting

Range: 100, 200, 400, 800

Unit: ms

Query

same with the setting

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:DRX:T321 100" 
!Sets the T321 to 100ms.

Function

Sets/queries the Number of HS-DSCH Common H-RNTIs.

This setting can only be changed when Call/Data Status is Idle .

Setting

Range: 1, 2, 3, 4

Query

Range: 1, 2, 3, 4

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:HRNTi:COMMon:COUNt 4" 

Function

Sets/queries the HS-SCCH1 Common HRNTI(Hex).

This setting can only be changed when Call/Data Status is Idle .

Setting

Range: 0x0000 to 0xFFFF 

Query

same with the setting

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:HRNTi:COMMon:HSSCCH1 0xFAAA" 

Function

Sets/queries the HS-SCCH2 Common HRNTI(Hex).

This setting can only be changed when Call/Data Status is Idle .

Setting

Range: 0x0000 to 0xFFFF 

Query

same with the setting

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:HRNTi:COMMon:HSSCCH2 0xFAAB" 

Function

Sets/queries the HS-SCCH3 Common HRNTI(Hex).

This setting can only be changed when Call/Data Status is Idle .

Setting

Range: 0x0000 to 0xFFFF 

Query

same with the setting

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:HRNTi:COMMon:HSSCCH3 0xFAAC" 

Function

Sets/queries the HS-SCCH4 Common HRNTI(Hex).

This setting can only be changed when Call/Data Status is Idle .

Setting

Range: 0x0000 to 0xFFFF 

Query

same with the setting

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:HRNTi:COMMon:HSSCCH4 0xFAAE" 

Function

Sets/queries the BCCH specific H-RNTI.

This setting can only be changed when Call/Data Status is Idle .

Setting

Range: 0x0000 to 0xFFFF

Query

same with the setting

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:HRNTi:SPECific:BCCHannel 0xFAEA" 

Function

The setting form of this command performs two functions: (1) sets the CALL[:CELL]:CHSDschannel:HSPDschannel:LEVel and (2) sets the CALL[:CELL]:CHSDschannel:HSPDschannel:STATe to on.

See Common HS-DSCH HS-PDSCH Level.

The query form of this command returns the CALL[:CELL]:CHSDschannel:HSPDschannel:LEVel.

Setting

Range: -20.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:HSPDschannel[:SLEVel] -5" 

Function

Sets/queries the Common HS-DSCH HS-PDSCH Power Offset.

Setting

Range: -20.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:HSPDschannel:LEVel -5" 

Function

Sets/queries the Common HS-DSCH HS-PDSCH State.

Setting

Range: 1|ON|0|OFF

Query

same with the setting

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:HSPDschannel:STATe ON" 

Function

The setting form of this command performs two functions: (1) sets the CALL[:CELL]:CHSDschannel:HSSCchannel[1]:LEVel and (2) sets the CALL[:CELL]:CHSDschannel:HSSCchannel[1]:STATe to on.

See Common HS-DSCH  HS-SCCH[1] Level.

The query form of this command returns the CALL[:CELL]:CHSDschannel:HSSCchannel[1]:LEVel.

Setting

Range: -20.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:HSSCchannel1[:SLEVel] -10" 

Function

Sets/queries the Common HS-DSCH HS-SCCH[1] Power Offset.

Setting

Range: -20.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:HSSCchannel1:LEVel -10" 

Function

Sets/queries the Common HS-DSCH HS-SCCH[1] State.

Setting

Range: 1|ON|0|OFF

Query

same with the setting

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:HSPDschannel[1]:STATe ON" 

Function

The setting form of this command performs two functions: (1) sets the CALL[:CELL]:CHSDschannel:HSSCchannel2|3|4:LEVel and (2) sets the CALL[:CELL]:CHSDschannel:HSSCchannel2|3|4:STATe to on.

See Common HS-DSCH HS-SCCH2|3|4:Level.

The query form of this command returns the CALL[:CELL]:CHSDschannel:HSSCchannel2|3|4:LEVel.

Setting

Range: -20.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:HSSCchannel2[:SLEVel] -15" 

Function

Sets/queries the Common HS-DSCH HS-SCCH1|2|3|4 Power Offset.

Setting

Range: -20.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:HSSCchannel2:LEVel -15" 

Function

Sets/queries the Common HS-DSCH HS-SCCH2|3|4 State.

Setting

Range:1|ON|0|OFF

Query

Range: 1|ON|0|OFF

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:HSSCchannel2:STATe ON" 

Function

The setting form of this command performs two functions: (1) sets the CALL[:CELL]:CHSDschannel:PICHannel:LEVel and (2) sets the CALL[:CELL]:CHSDschannel:PICHannel:STATe to on.

See Common HS-DSCH PICH Level.

The query form of this command returns the CALL[:CELL]:CHSDschannel:PICHannel:LEVel.

Setting

Range: -20.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:PICHannel[:SLEVel] -15" 

Function

Sets/queries the Common HS-DSCH PICH Power Offset.

Setting

Range: -20.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:PICHannel:LEVel -15" 

Function

Sets/queries the Common HS-DSCH PICH State.

Setting

Range: 1|ON|0|OFF

Query

same with the setting

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:PICHannel:STATe ON" 

Function

Sets/queries the Common HS-DSCH State.

Setting

Range: 1|ON|0|OFF

Query

Range: 1|ON|0|OFF

*RST Setting

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CHSDschannel:STATe ON"