STATus:OPERation

Last updated: January 16, 2009

STATus:OPERation Register Bit Assignments

The OPERation status register set contains bits which give an indication of conditions that are part of the test set's normal operation.

Bit Number	Binary Weighting	Condition	Description
15	32768	Not Used. Defined by SCPI.	This bit is always 0.
14	16384	KEYPressed Summary	This bit is the summary bit for the STATus:OPERation:KEYPressed register.
13	8192	Reserved for future use.	This bit is always 0.
12	4096	SYSTem:SYNChronized	This condition bit is "pulsed" by the SYSTem:SYNChronized command. This will allow the status system to indicate that the input buffer is synchronized to the point where this command is parsed and that all prior sequential commands are completed and all prior overlapped commands have started.
11	2048	HARDware Summary	This bit is the summary bit for the STATus:OPERation:HARDware register.
10	1024	CALL Summary	This bit is the summary bit for the STATus:OPERation:CALL register.
9	512	NMRReady (New Measurement Result Ready) Summary	This bit is the summary bit for the STATus:OPERation:NMRReady register.
8	256	Reserved for future use.	This bit is always 0.
7	128	Reserved for future use.	This bit is always 0.
6	64	Reserved for future use.	This bit is always 0.
5	32	Reserved for future use.	This bit is always 0.
4	16	Reserved for future use.	This bit is always 0.
3	8	Reserved for future use.	This bit is always 0.
2	4	Reserved for future use.	This bit is always 0.
1	2	Reserved for future use.	This bit is always 0.
0	1	Extension Bit	This bit is always 0.

Program Examples - STATus:OPERation

 
OUTPUT 714;"STATUS:OPERATION:EVENT?" !Queries the Operation Event Register.
OUTPUT 714;"STATUS:OPERATION:CONDITION?" !Queries the Operation Condition Register.
OUTPUT 714;"STATUS:OPERATION:ENABLE 1024" !Sets the Operation Enable Register for bit 10.
OUTPUT 714;"STATUS:OPERATION:NTR 1024" !Sets the Operation Negative Transition 
                                       !Register for bit 10.
OUTPUT 714;"STATUS:OPERATION:PTR 512" !Sets the Operation Event Positive Transition
                                      !Register for bit 9.

STATus:OPERation:CALL Condition Register Bit Assignment

The STATus:OPERation:CALL register bits will be used to indicate status of processes that occur during normal call processing operations.

Bit Number	Binary Weighting	Condition	Description
15	32768	Not Used. Defined by SCPI.	This bit is always 0.
14	16384	Reserved for future use.	This bit is always 0.
13	8192	Reserved for future use.	This bit is always 0.
12	4096	Reserved for future use.	This bit is always 0.
11	2048	WCDMa Summary bit	This bit is the summary message bit for the STATus:OPERation:CALL:WCDMa register.
10	1024	FDD Summary bit	This bit is the summary message bit for the STATus:OPERation:CALL:FDD register.
9	512	TA2000 Summary bit	This bit is the summary message bit for the STATus:OPERation:CALL:TA2000 register.
8	256	CDMA Summary bit	This bit is the summary message bit for the STATus:OPERation:CALL:CDMA register.
7	128	DIGital2000 Summary bit	This bit is the summary message bit for the STATus:OPERation:CALL:DIGital2000 register.
6	64	DIGital95 Summary bit	This bit is the summary message bit for the STATus:OPERation:CALL:DIGital95 register.
5	32	TA136 Summary bit	This bit is the summary message bit for the STATus:OPERation:CALL:TA136 register.
4	16	DIGital136 Summary bit	This bit is the summary message bit for the STATus:OPERation:CALL:DIGITAL136 register.
3	8	AMPS Summary bit	This bit is the summary message bit for the STATus:OPERation:CALL:AMPS register.
2	4	GSM Summary bit	This bit is the summary message bit for the STATus:OPERation:CALL:GSM register.
1	2	COMMon Summary bit	This bit is the summary message bit for the STATus:OPERation:CALL:COMMon register.
0	1	Extension Bit	This bit is always 0.

Program Examples - STATus:OPERation:CALL

 
OUTPUT 714;"STATUS:OPERATION:CALL:EVENT?" !Queries the Operation Call Event !Register.
OUTPUT 714;"STATUS:OPERATION:CALL:CONDITION?" !Queries the Operation Call Condition Register.
OUTPUT 714;"STATUS:OPERATION:CALL:ENABLE 4" 
	!Sets the Operation Call Enable Register for bit 2.
OUTPUT 714;"STATUS:OPERATION:CALL:NTR 4" !Sets the Negative Transition Register for bit 2.
OUTPUT 714;"STATUS:OPERATION:CALL:PTR 256" !Sets the Positive Transition Register for bit 8.

STATus:OPERation:CALL:COMMon Condition Register Bit Assignment

The STATus:OPERation:CALL:COMMon register bits will be used to indicate status of processes that occur during normal call processing operations.

Bit Number	Binary Weighting	Condition	Description
15	32768	Not Used. Defined by SCPI.	This bit is always 0.
14	16384	Data Summary	This bit is the summary message bit for the STATus:QUEStionable:CALL:GSM:DATA register.
13	8192	Call Control Status Access Probe	This bit is a 1 when the test set is in the call control status access probe state.
12	4096	Call Control Status Set Up Request	This bit is a 1 when the test set is in the call control status set up request state.
11	2048	Call Control Status Releasing	This bit is a 1 when the test set is in the call control status releasing state.
10	1024	Call Control Status Paging	This bit is a 1 when the test set is in the call control status paging state.
9	512	Registering (BS initiated)	This bit is set to a 1 when the Base Station initiates registration.
8	256	Call Control Status Dormant
7	128	BS Originating	This bit is a 1 when: Active Cell mode - the call processing state leaves the idle state Test mode - the test set has noted a base station origination.
6	64	Call Control Status Changing	This bit is a 1 when the test set is in the call control status changing state.
5	32	Call Control Status Handover/Handoff	This bit is a 1 when the test set is in the call control handover or handoff state.
4	16	Call Control Status Registering	This bit will be a 1 when the test set is in the call control status registering state.
3	8	Call Control Status is "Alerting"	This bit is a 1 when the test set is in the call alerting state (ringing).
2	4	Call Control Status is "Connected"	This bit is a 1 when the test set is in the call connected state.
1	2	Call Control Status is "Idle"	This bit is a 1 when the test set is in the call idle state.
0	1	Extension Bit	This bit is always 0.

Program Examples - STATus:OPERation:CALL:COMMon

 
OUTPUT 714;"STATUS:OPERATION:CALL:COMMON:EVENT?" !Queries the Operation Call Common Event 
                                          !Register.
OUTPUT 714;"STATUS:OPERATION:CALL:COMMON:CONDITION?" !Queries the Operation Call Common 
                                              !Condition Register.
OUTPUT 714;"STATUS:OPERATION:CALL:COMMON:ENABLE 8" !Sets the Operation Call Common Enable 
                                            !Register for bit 3.
OUTPUT 714;"STATUS:OPERATION:CALL:COMMON:NTR 8" !Sets the Negative Transition
                                         !Register for bit 3.
OUTPUT 714;"STATUS:OPERATION:CALL:COMMON:PTR 256" !Sets the Positive Transition 
                                           !Register for bit 8.

STATus:OPERation:CALL:COMMon:DATA Condition Register Bit Assignment

The STATus:OPERation:CALL:COMMon:DATA register bits are used to indicate status of processes that occur during normal data connection processing operations.

Bit Number	Binary Weighting	Condition	Description
15	32768	Not Used. Defined by SCPI.	This bit is always 0.
14	16384	Ping Active
13	8192	Reserved for future use.	This bit is always 0.
12	4096	Reserved for future use.	This bit is always 0.
11	2048	Reserved for future use.	This bit is always 0.
10	1024	Reserved for future use.	This bit is always 0.
9	512	Data Connection Status Session Open	This bit is always 0.
8	256	Data Connection Status PDP Active	This bit is always 0.
7	128	Starting Data Connection	This bit is a 1 when: Active Cell mode - the data connection status leaves the idle state Test mode - the test set has noted a base station origination.
6	64	Data Connection Status Changing	This bit is set to a 1 when the data connection status change detector has been armed.
5	32	Data Connection Status Off	This bit is set to 1 when the test set is in the call control status handover/handoff state.
4	16	Data Connection Status Data Connected	This bit is set to 1 when data connection status data is in the connected state.
3	8	Data Connection Status Transferring	This bit is set to 1 when the data connection status is Transferring.
2	4	Data Connection Status Attached	This bit is set to 1 when the data connection status is Attached.
1	2	Data Connection Status Idle	This bit is set to 1 when the data connection status is Idle.
0	1	Extension Bit	This bit will always be 0.

Program Examples STATus:OPERation:CALL:COMMon:DATA

 
OUTPUT 714;"STATUS:OPERATION:CALL:COMMON:DATA:EVENT?" !Queries and clears the Operation
                                                      !Call Common Data Event Register
OUTPUT 714;"STATUS:OPERATION:CALL:COMMON:DATA:CONDITION?" !Queries and clears the Operation
                                                          !Call Common Data Condition
                                                          !Register
OUTPUT 714;"STATUS:OPERATION:CALL:COMMON:DATA:ENABLE 128" !Sets the Operation Call Common
                                                          !Data Enable Register for bit 7
OUTPUT 714;"STATUS:OPERATION:CALL:COMMON:NTRANSITION 2" !Sets the Operation Call Common
                                                        !Data Negative Transition Filter
                                                        !Register for bit 1
OUTPUT 714;"STATUS:OPERATION:CALL:COMMON:PTRANSITION 2" !Set the Operation Call Common
                                                        !Data Positive Transition Filter
                                                        !Register for bit 1

STATus:OPERation:FEATures Register Bit Assignments

The STATus:OPERation:FEATures register bits are used to access miscellaneous Features Registers.

Bit Number	Binary Weighting	Condition	Description
15	32768	Not Used. Defined by SCPI.	This bit is always 0.
14	16384	Reserved for future use.	This bit is always 0.
13	8192	Reserved for future use.	This bit is always 0.
12	4096	Reserved for future use.	This bit is always 0.
11	2048	Reserved for future use.	This bit is always 0.
10	1024	Reserved for future use.	This bit is always 0.
9	512	Reserved for future use.	This bit is always 0.
8	256	Reserved for future use.	This bit is always 0.
7	128	Reserved for future use.	This bit is always 0.
6	64	Reserved for future use.	This bit is always 0.
5	32	Reserved for future use.	This bit is always 0.
4	16	Reserved for future use.	This bit is always 0.
3	8	Reserved for future use.	This bit is always 0.
2	4	Reserved for future use.	This bit is always 0.
1	2	COMMon Summary Bit	This bit is the summary bit for the STATus:OPERation:FEATures:COMMon register. (see STATus:OPERation:FEATures:COMMon Register Bit Assignments )
0	1	Extension Bit	This bit is always 0.

STATus:OPERation:FEATures:COMMon Register Bit Assignments

The STATus:OPERation:FEATures:COMMon register bits indicate the status of processes that occur during various operations.

Bit Number	Binary Weighting	Condition	Description
15	32768	Not Used. Defined by SCPI.	This bit is always 0.
14	16384	Reserved for future use.	This bit is always 0.
13	8192	Reserved for future use.	This bit is always 0.
12	4096	Reserved for future use.	This bit is always 0.
11	2048	Reserved for future use.	This bit is always 0.
10	1024	Reserved for future use.	This bit is always 0.
9	512	Reserved for future use.	This bit is always 0.
8	256	Reserved for future use.	This bit is always 0.
7	128	Reserved for future use.	This bit is always 0.
6	64	Reserved for future use.	This bit is always 0.
5	32	Reserved for future use.	This bit is always 0.
4	16	Reserved for future use.	This bit is always 0.
3	8	Reserved for future use.	This bit is always 0.
2	4	Reserved for future use.	This bit is always 0.
1	2	SMService Summary bit	This bit is the summary message bit for the STATus:OPERation:FEATures:COMMon:SMService register. (see STATus:OPERation:FEATures:COMMon:SMService Register Bit Assignments )
0	1	Extension Bit	This bit is always 0.

STATus:OPERation:FEATures:COMMon:SMService Register Bit Assignments

The STATus:OPERation:FEATures:COMMon:SMService register bits indicate the status of processes that occur during SMS operations.

Bit Number	Binary Weighting	Condition	Description
15	32768	Not Used. Defined by SCPI.	This bit is always 0.
14	16384	Mobile-Originated SMS Message Queue Overflow	The CONDition bit moves from 0 to 1 and back to 0 when the event takes place.
13	8192	Reserved for future use.	This bit is always 0.
12	4096	Reserved for future use.	This bit is always 0.
11	2048	Reserved for future use.	This bit is always 0.
10	1024	Reserved for future use.	This bit is always 0.
9	512	Reserved for future use.	This bit is always 0.
8	256	Reserved for future use.	This bit is always 0.
7	128	Mobile-Originated Message Received/Ready to be Returned	If message queuing is "OFF", the CONDition bit moves from 0 to 1 and back to 0 when the event takes place. If message queuing is "ON", the CONDition bit is set to 1 and remains there until the test set is informed by the controller that all received messages have been read.
6	64	Reserved for future use.	This bit is always 0.
5	32	Reserved for future use.	This bit is always 0.
4	16	Reserved for future use.	This bit is always 0.
3	8	Reserved for future use.	This bit is always 0.
2	4	Reserved for future use.	This bit is always 0.
1	2	Reserved for future use.	This bit is always 0.
0	1	Extension Bit	This bit is always 0.

STATus:OPERation:HARDware Condition Register Bit Assignments

The STATus:OPERation:HARDware register bits indicate when a softkey on the test set's front panel has been pressed while the test set is in remote operating mode.

Bit Number	Binary Weighting	Condition	Description
15	32768	Not Used. Defined by SCPI.	This bit is always 0.
14	16384	Reserved for future use.	This bit is always 0.
13	8192	Reserved for future use.	This bit is always 0.
12	4096	Reserved for future use.	This bit is always 0.
11	2048	Reserved for future use.	This bit is always 0.
10	1024	Reserved for future use.	This bit is always 0.
9	512	Reserved for future use.	This bit is always 0.
8	256	Reserved for future use.	This bit is always 0.
7	128	Reserved for future use.	This bit is always 0.
6	64	Reserved for future use.	This bit is always 0.
5	32	Reserved for future use.	This bit is always 0.
4	16	Reserved for future use.	This bit is always 0.
3	8	Reserved for future use.	This bit is always 0.
2	4	Reserved for future use.	This bit is always 0.
1	2	External Timebase in use	This bit is a 1 if a suitable external timebase is connected to the test set's 10 MHz REF IN connector on the rear panel of the test set.
0	1	Extension Bit	This bit is always 0.

Program Examples - STATus:OPERation:HARDware

 
OUTPUT 714;"STATUS:OPERATION:HARDware:EVENT?" 
	!Queries the HARDware Event Register.
OUTPUT 714;"STATUS:OPERATION:HARDware:CONDITION?" 
	!Queries the HARDware Condition Register.
OUTPUT 714;"STATUS:OPERATION:HARDware:ENABLE 16" 
	!Sets HARDware Enable register for bit 4.
OUTPUT 714;"STATUS:OPERATION:HARDware:NTR 2" 
	!Sets the HARDware Negative Transition Register for bit 1.
OUTPUT 714;"STATUS:OPERATION:HARDware:PTR 4" 
	!Sets the HARDware Positive Transition Register for bit 2

STATus:OPERation:KEYPressed Register Bit Assignments

The STATus:OPERation:KEYPressed register bits indicate when a softkey on the test set's front panel has been pressed while the test set is in remote operating mode.

Bit Number	Binary Weighting	Condition	Description
15	32768	Not Used. Defined by SCPI.	This bit is always 0.
14	16384	Reserved for future use.	This bit is always 0.
13	8192	Reserved for future use.	This bit is always 0.
12	4096	Reserved for future use.	This bit is always 0.
11	2048	F12 softkey	This bit is a 1 when the test set's F12 softkey has been pressed.
10	1024	F11 softkey	This bit is a 1 when the test set's F11 softkey has been pressed.
9	512	F10 softkey	This bit is a 1 when the test set's F10 softkey has been pressed.
8	256	F9 softkey	This bit is a 1 when the test set's F9 softkey has been pressed.
7	128	F8 softkey	This bit is a 1 when the test set's F8 softkey has been pressed.
6	64	F7 softkey	This bit is a 1 when the test set's F7 softkey has been pressed.
5	32	F6 softkey	This bit is a 1 when the test set's F6 softkey has been pressed.
4	16	F5 softkey	This bit is a 1 when the test set's F5 softkey has been pressed.
3	8	F4 softkey	This bit is a 1 when the test set's F4 softkey has been pressed.
2	4	F3 softkey	This bit is a 1 when the test set's F3 softkey has been pressed.
1	2	F2 softkey	This bit is a 1 when the test set's F2 softkey has been pressed.
0	1	F1 softkey	This bit is a 1 when the test set's F1 softkey has been pressed.

Program Examples - STATus:OPERation:KEYPressed

 
OUTPUT 714;"STATUS:OPERATION:KEYPRESSED:EVENT?" 
	!Queries the Keypressed Event Register.
OUTPUT 714;"STATUS:OPERATION:KEYPRESSED:CONDITION?" 
	!Queries the Keypressed Condition Register.
OUTPUT 714;"STATUS:OPERATION:KEYPRESSED:ENABLE 16" 
	!Sets Keypressed Enable register for bit 4.
OUTPUT 714;"STATUS:OPERATION:KEYPRESSED:NTR 2" 
	!Sets the Keypressed Negative Transition Register for bit 1.
OUTPUT 714;"STATUS:OPERATION:KEYPRESSED:PTR 4" 
	!Sets the Keypressed Positive Transition Register for bit 2

STATus:OPERation:NMRReady Register Bit Assignments

The STATus:OPERation:NMRReady register bits indicate when a measurement has been completed and new measurement results are available.

Bit Number	Binary Weighting	Condition	Description
15	32768	Not Used. Defined by SCPI.	This bit is always 0.
14	16384	Reserved for future use.	This bit is always 0.
13	8192	Reserved for future use.	This bit is always 0.
12	4096	Reserved for future use.	This bit is always 0.
11	2048	WCDMa Summary bit	This bit is the summary message bit for the STATus:OPERation:NMRReady:WCDMa register.
10	1024	FDD Summary bit	This bit is the summary message bit for the STATus:OPERation:NMRReady:FDD register.
9	512	TA2000 Summary bit	This bit is the summary message bit for the STATus:OPERation:NMRReady:TA2000 register.
8	256	CDMA Summary bit	This bit is the summary message bit for the STATus:OPERation:NMRReady:CDMA register.
7	128	DIGital2000 Summary bit	This bit is the summary message bit for the STATus:OPERation:NMRReady:DIGital2000 register.
6	64	DIGital95 Summary bit	This bit is the summary message bit for the STATus:OPERation:NMRReady:DIGital95 register.
5	32	TA136 Summary bit	This bit is the summary message bit for the STATus:OPERation:NMRReady:TA136 register.
4	16	DIGITAL136 Summary bit	This bit is the summary message bit for the STATus:OPERation:NMRReady:DIGITAL136 register.
3	8	AMPS Summary bit	This bit is the summary message bit for the STATus:OPERation:NMRReady:AMPS register.
2	4	GSM Summary bit	This bit is the summary message bit for the STATus:OPERation:NMRReady:GSM register.
1	2	COMMON Summary bit	This bit is the summary message bit for the STATus:OPERation:NMRReady:COMMon register.
0	1	Extension Bit	This bit is always 0.

Program Examples - STATus:OPERation:NMRReady

 
OUTPUT 714;"STATUS:OPERATION:NMRREADY:EVENT?" !Queries the New Measurement 
                                              !Results Ready Event Register.
OUTPUT 714;"STATUS:OPERATION:NMRREADY:CONDITION?" !Queries the New Measurement 
                                                  !Results Ready 
                                                  !Condition Register.
OUTPUT 714;"STATUS:OPERATION:NMRREADY:ENABLE 16" !Sets New Measurement Results 
                                                 !Ready Enable Regigter 
                                                 !for bit 4.
OUTPUT 714;"STATUS:OPERATION:NMRREADY:NTR 2" !Sets the New Measurement Results
                                             !Ready Negative Transition 
                                             !Register for bit 1.
OUTPUT 714;"STATUS:OPERATION:NMRREADY:PTR 4" !Sets the New Measurement 
                                             !Results Ready Positive 
                                             !Transition Register 
                                             !for bit 2

STATus:OPERation:NMRReady:AMPS Condition Register Bit Assignment

The STATus:OPERation:NMRReady:AMPS register bits indicate when a measurement has been completed and new measurement results are available.

Bit Number	Binary Weighting	Condition	Description
15	32768	Not Used. Defined by SCPI.	This bit is always 0.
14	16384	Reserved for future use.	This bit is always 0.
13	8192	Reserved for future use.	This bit is always 0.
12	4096	Reserved for future use.	This bit is always 0.
11	2048	Reserved for future use.	This bit is always 0.
10	1024	Reserved for future use.	This bit is always 0.
9	512	Reserved for future use.	This bit is always 0.
8	256	Reserved for future use.	This bit is always 0.
7	128	Reserved for future use.	This bit is always 0.
6	64	Reserved for future use.	This bit is always 0.
5	32	Reserved for future use.	This bit is always 0.
4	16	Reserved for future use.	This bit is always 0.
3	8	Frequency Modulation New Measurement Result Ready	This bit is a 1 if the measurement has been completed and has produced new results. This bit is a zero at power on, after a preset and while a measurement is in Measuring States.
2	4	Frequency Stability New Measurement Result Ready	This is a 1 if the measurement has been completed and has produced new results. This bit is a zero at power on, after a preset and while a measurement is in Measuring States.
1	2	Analog Transmit Power New Measurement Result Ready	This bit is a 1 if the measurement has been completed and has produced new results. This bit is a zero at power on, after a preset and while a measurement is in Measuring States.
0	1	Extension Bit	This bit is always 0.

Program Examples - STATus:OPERation:NMRReady:AMPS

 
OUTPUT 714;"STATUS:OPERATION:NMRREADY:AMPS:EVENT?" !Queries the New Measurement 
                                              !Results Ready AMPS Event Register.
OUTPUT 714;"STATUS:OPERATION:NMRREADY:AMPS:CONDITION?" !Queries the New Measurement 
                                                  !Results Ready AMPS 
                                                  !Condition Register.
OUTPUT 714;"STATUS:OPERATION:NMRREADY:AMPS:ENABLE 8" !Sets New Measurement Results 
                                                 !Ready AMPS Enable Register 
                                                 !for bit 3.
OUTPUT 714;"STATUS:OPERATION:NMRREADY:AMPS:NTR 2" !Sets the New Measurement Results
                                             !Ready AMPS Negative Transition 
                                             !Register for bit 1.
OUTPUT 714;"STATUS:OPERATION:NMRREADY:AMPS:PTR 4" !Sets the New Measurement 
                                             !Results Ready AMPS Positive 
                                             !Transition Register 
                                             !for bit 2.

STATus:OPERation:NMRReady:CDMA Condition Register Bit Assignments

The STATus:OPERation:NMRReady:CDMA register bits indicate when a measurement has been completed and new measurement results are available.

Bit Number	Binary Weighting	Condition	Description
15	32768	Not Used. Defined by SCPI.	This bit is always 0.
14	16384	Reserved for future use.	This bit is always 0.
13	8192	CFDTune New Measurement Result Ready.	This bit is a 1 if the Fast Device Tune measurement has completed and has produced new results. This bit is a zero at power on, after a preset and while a measurement is in Measuring States. See Triggering of Measurements .
12	4096	Reserved for future use.	This bit is always 0.
11	2048	Reserved for future use.	This bit is always 0.
10	1024	CTDPower New Measurement Result Ready	This bit is a 1 if the measurement has completed and has produced new results. This bit is a zero at power on, after a preset and while a measurement is in Measuring States. See Triggering of Measurements .
9	512	GAPPower New Measurement Result Ready	This bit is a 1 if the measurement has completed and has produced new results. This bit is a zero at power on, after a preset and while a measurement is in Measuring States. See Triggering of Measurements .
8	256	CTXSpurious New Measurement Result Ready	This bit is a 1 if the measurement has completed and has produced new results. This bit is a zero at power on, after a preset and while a measurement is in Measuring States. See Triggering of Measurements .
7	128	GPOWer New Measurement Result Ready	This bit is a 1 if the measurement has completed and has produced new results. This bit is a zero at power on, after a preset and while a measurement is in Measuring States. See Triggering of Measurements .
6	64	TROPower New Measurement Result Ready	This bit is a 1 if the measurement has completed and has produced new results. This bit is a zero at power on, after a preset and while a measurement is in Measuring States. See Triggering of Measurements .
5	32	CAPPower New Measurement Result Ready	This bit is a 1 if the measurement has completed and has produced new results. This bit is a zero at power on, after a preset and while a measurement is in Measuring States. See Triggering of Measurements .
4	16	CFERror New Measurement Result Ready	This bit is a 1 if the measurement has completed and has produced new results. This bit is a zero at power on, after a preset and while a measurement is in Measuring States. See Triggering of Measurements .
3	8	CPOWer New Measurement Result Ready	This bit is a 1 if the measurement has completed and has produced new results. This bit is a zero at power on, after a preset and while a measurement is in Measuring States. See Triggering of Measurements .
2	4	WQUality New Measurement Result Ready	This bit is a 1 if the measurement has completed and has produced new results. This bit is a zero at power on, after a preset and while a measurement is in Measuring States. See Triggering of Measurements .
1	2	DAPower New Measurement Result Ready	This bit is a 1 if the measurement has completed and has produced new results. This bit is a zero at power on, after a preset and while a measurement is in Measuring States. See Triggering of Measurements .
0	1	Extension Bit	This bit is always 0.

Program Examples - STATus:OPERation:NMRReady:CDMA

 
OUTPUT 714;"STATUS:OPERATION:NMRREADY:CDMA:EVENT?" !Queries the New Measurement 
                                              !Results Ready CDMA Event Register.
OUTPUT 714;"STATUS:OPERATION:NMRREADY:CDMA:CONDITION?" !Queries the New Measurement 
                                                  !Results Ready CDMA 
                                                  !Condition Register.
OUTPUT 714;"STATUS:OPERATION:NMRREADY:CDMA:ENABLE 8" !Sets New Measurement Results 
                                                 !Ready CDMA Enable Regigter 
                                                 !for bit 3.
OUTPUT 714;"STATUS:OPERATION:NMRREADY:CDMA:NTR 2" !Sets the New Measurement Results
                                             !Ready CDMA Negative Transition 
                                             !Register for bit 1.
OUTPUT 714;"STATUS:OPERATION:NMRREADY:CDMA:PTR 4" !Sets the New Measurement 
                                             !Results Ready CDMA Positive 
                                             !Transition Register 
                                             !for bit 2

STATus:OPERation:NMRReady:COMMon Register Bit Assignments

The STATus:OPERation:NMRReady:COMMon register bits indicate when a measurement has been completed and new measurement results are available. See Triggering of Measurements for related information.

Bit Number	Binary Weighting	Condition	Description
15	32768	Not Used. Defined by SCPI.	This bit is always 0.
14	16384	Reserved for future use.	This bit is always 0.
13	8192	Reserved for future use.	This bit is always 0.
12	4096	Reserved for future use.	This bit is always 0.
11	2048	Reserved for future use.	This bit is always 0.
10	1024	Reserved for future use.	This bit is always 0.
9	512	Reserved for future use.	This bit is always 0.
8	256	Reserved for future use.	This bit is always 0.
7	128	Reserved for future use.	This bit is always 0.
6	64	Reserved for future use.	This bit is always 0.
5	32	Reserved for future use.	This bit is always 0.
4	16	Reserved for future use.	This bit is always 0.
3	8	Spectrum Monitor New Measurement Result Ready	This bit is a 1 if the measurement has been completed and has produced new results. This bit is a zero at power on, after a preset and while a measurement is in Measuring States.
2	4	Swept Audio New Measurement Result Ready	This bit is a 1 if the measurement has been completed and has produced new results. This bit is a zero at power on, after a preset and while a measurement is in Measuring States.
1	2	Audio Analyzer New Measurement Result Ready	This bit is a 1 if the measurement has been completed and has produced new results. This bit is a zero at power on, after a preset and while a measurement is in Measuring States.
0	1	Extension Bit	This bit is always 0.

Program Examples - STATus:OPERation:NMRReady:COMMon

 
OUTPUT 714;"STATUS:OPERATION:NMRREADY:COMMON:EVENT?" !Queries the New Measurement 
                                              !Results Ready Common Event Register.
OUTPUT 714;"STATUS:OPERATION:NMRREADY:COMMON:CONDITION?" !Queries the New Measurement 
                                                  !Results Ready Common 
                                                  !Condition Register.
OUTPUT 714;"STATUS:OPERATION:NMRREADY:COMMON:ENABLE 2" !Sets New Measurement Results 
                                                 !Ready Common Enable Register 
                                                 !for bit 1.
OUTPUT 714;"STATUS:OPERATION:NMRREADY:COMMON:NTR 2" !Sets the New Measurement Results
                                             !Ready Common Negative Transition 
                                             !Register for bit 1.
OUTPUT 714;"STATUS:OPERATION:NMRREADY:COMMON:PTR 2" !Sets the New Measurement 
                                             !Results Ready Common Positive 
                                             !Transition Register 
                                             !for bit 1

STATus:OPERation:NMRReady:FDD Register Bit Assignments

The STATus:OPERation:NMRReady:FDD register bits indicate when a measurement has been completed and new measurement results are available. See Triggering of Measurements for related information.

Bit Number	Binary Weighting	Condition	Description
15	32768	Not Used. Defined by SCPI.	This bit is always 0.
14	16384	Reserved for future use.	This bit is always 0.
13	8192	WPDiscon New Measurement Result Ready	This bit is a 1 if the measurement has been completed and has produced new results. This bit is a zero at power on, after a preset, or while a measurement is in its measuring state.
12	4096	WPPAnalysis New Measurement Result Ready	This bit is a 1 if the measurement has been completed and has produced new results. This bit is a zero at power on, after a preset, or while a measurement is in its measuring state.
11	2048	WOOPower New Measurement Result Ready	This bit is a 1 if the measurement has been completed and has produced new results. This bit is a zero at power on, after a preset, or while a measurement is in its measuring state.
10	1024	WIQTuning New Measurement Result Ready	This bit is a 1 if the measurement has been completed and has produced new results. This bit is a zero at power on, after a preset, or while a measurement is in its measuring state.
9	512	WILPower New Measurement Result Ready	This bit is a 1 if the measurement has been completed and has produced new results. This bit is a zero at power on, after a preset, or while a measurement is in its measuring state.
8	256	WCDomain New Measurement Result Ready	This bit is a 1 if the measurement has been completed and has produced new results. This bit is a zero at power on, after a preset, or while a measurement is in its measuring state.
7	128	WOBWidth New Measurement Result Ready	This bit is a 1 if the measurement has been completed and has produced new results. This bit is a zero at power on, after a preset, or while a measurement is in its measuring state.
6	64	WSEMask New Measurement Result Ready	This bit is a 1 if the measurement has been completed and has produced new results. This bit is a zero at power on, after a preset, or while a measurement is in its measuring state.
5	32	WBERror New Measurement Result Ready	This bit is a 1 if the measurement has been completed and has produced new results. This bit is a zero at power on, after a preset, or while a measurement is in its measuring state.
4	16	WCPower New Measurement Result Ready	This bit is a 1 if the measurement has been completed and has produced new results. This bit is a zero at power on, after a preset, or while a measurement is in its measuring state.
3	8	WWQuality New Measurement Result Ready.	This bit is a 1 if the measurement has been completed and has produced new results. This bit is a zero at power on, after a preset, or while a measurement is in its measuring state.
2	4	WACLeakage New Measurement Result Ready.	This bit is a 1 if the measurement has been completed and has produced new results. This bit is a zero at power on, after a preset, or while a measurement is in its measuring state.
1	2	WTPower New Measurement Result Ready.	This bit is a 1 if the measurement has been completed and has produced new results. This bit is a zero at power on, after a preset, or while a measurement is in its measuring state.
0	1	FDD2 Summary	This bit is the summary bit for the STATus:OPERation:NMRReady:FDD2 register.

Program Examples - STATus:OPERation:NMRReady:FDD

 
OUTPUT 714;"STATUS:OPERATION:NMRREADY:FDD:EVENT?" !Queries the New Measurement 
                                              !Results Ready FDD Event Register.
OUTPUT 714;"STATUS:OPERATION:NMRREADY:FDD:CONDITION?" !Queries the New 
                                                  !Measurement Results Ready FDD 
                                                  !Condition Register.
OUTPUT 714;"STATUS:OPERATION:NMRREADY:FDD:ENABLE 8" !Sets New Measurement Results 
                                                 !Ready FDD Enable Register 
                                                 !for bit 3.
OUTPUT 714;"STATUS:OPERATION:NMRREADY:FDD:NTR 2" !Sets the New Measurement Results
                                             !Ready FDD Negative Transition 
                                             !Register for bit 1.
OUTPUT 714;"STATUS:OPERATION:NMRREADY:FDD:PTR 4" !Sets the New Measurement 
                                             !Results Ready FDD Positive 
                                             !Transition Register 
                                             !for bit 2

STATus:OPERation:NMRReady:FDD2 Register Bit Assignments

The STATus:OPERation:NMRReady:FDD2 register bits indicate when a measurement has been completed and new measurement results are available. See Triggering of Measurements for related information.

Bit Number	Binary Weighting	Condition	Description
15	32768	Not Used. Defined by SCPI.	This bit is always 0.
14	16384	Reserved for future use.	This bit is always 0.
13	8192	Reserved for future use.	This bit is always 0.
12	4096	Reserved for future use.	This bit is always 0.
11	2048	Reserved for future use.	This bit is always 0.
10	1024	Reserved for future use.	This bit is always 0.
9	512	Reserved for future use.	This bit is always 0.
8	256	Reserved for future use.	This bit is always 0.
7	128	Reserved for future use.	This bit is always 0.
6	64	WEDPower New Measurement Result Ready.	This bit is a 1 if the measurement has been completed and has produced new results. This bit is a zero at power on, after a preset, or while a measurement is in its measuring state.
5	32	HBLerror New Measurement Result Ready.	This bit is a 1 if the measurement has been completed and has produced new results. This bit is a zero at power on, after a preset, or while a measurement is in its measuring state.
4	16	WTDPower New Measurement Result Ready.	This bit is a 1 if the measurement has been completed and has produced new results. This bit is a zero at power on, after a preset, or while a measurement is in its measuring state.
3	8	WDPAnalysis New Measurement Result Ready.	This bit is a 1 if the measurement has been completed and has produced new results. This bit is a zero at power on, after a preset, or while a measurement is in its measuring state.
2	4	WCTFormat New Measurement Result Ready.	This bit is a 1 if the measurement has been completed and has produced new results. This bit is a zero at power on, after a preset, or while a measurement is in its measuring state.
1	2	WBLerror New Measurement Result Ready.	This bit is a 1 if the measurement has been completed and has produced new results. This bit is a zero at power on, after a preset, or while a measurement is in its measuring state.
0	1	Extension Bit	This bit is always 0.

Program Examples - STATus:OPERation:NMRReady:FDD2

 
OUTPUT 714;"STATUS:OPERATION:NMRREADY:FDD2:EVENT?" !Queries the New Measurement 
                                              !Results Ready FDD Event Register.
OUTPUT 714;"STATUS:OPERATION:NMRREADY:FDD2:CONDITION?" !Queries the New 
                                                  !Measurement Results Ready FDD 
                                                  !Condition Register.
OUTPUT 714;"STATUS:OPERATION:NMRREADY:FDD2:ENABLE 8" !Sets New Measurement Results 
                                                 !Ready FDD Enable Register 
                                                 !for bit 3.
OUTPUT 714;"STATUS:OPERATION:NMRREADY:FDD2:NTR 2" !Sets the New Measurement Results
                                             !Ready FDD Negative Transition 
                                             !Register for bit 1.
OUTPUT 714;"STATUS:OPERATION:NMRREADY:FDD2:PTR 4" !Sets the New Measurement 
                                             !Results Ready FDD Positive 
                                             !Transition Register 
                                             !for bit 2